Why Does Apple Ipad Say Not Charging

The “Not Charging” message usually shows up when you connect your iPad to a computer. For instance, there may be some dirt or debris in the charging port on the bottom of your device preventing your device make proper contact with the cable. How to fix your iPhone that won’t charge properly

Try another power socket or try plug it into your computer to see if that makes any difference. If you were already charging from your computer, try to plug it into another USB port. Try blowing (strongly) air into your device’s charging port.

Simply restart your iPad by pressing and holding the side button until you see the red slider. You can alternatively go to Settings > General > Shut Down (if your device is running iOS 11 and later) Simply go to Settings > General > Software Update.

iPad Not Charging? Here Are 8 Things to Try

Apple’s devices are just so darn reliable, right up to the point where they suddenly stop working! Lots of people who are googling “iPad not charging” are actually referring to a rather cryptic message that’s been around for years.

All this message means is that a cable has been connected to the iPad but there’s not enough power flowing through it to charge up the battery. Alternatively, you may find that it simply stops draining the battery while plugged in but doesn’t build up charge over time.

If your iPad won’t charge at all, with no chime or no life from a power-off state, make sure that the charger works properly. If you have an iPad that uses the Lightning connector, make sure that you are using an MFi (made for iOS) certified cable.

iOS devices that use the Apple Lightning connector will refuse to work with cables that don’t have the right MFi authentication hardware in them. At the time of writing, no USB cables have any sort of MFi-type block, with the exception of USB-C to Lightning adapters.

You can take a non-conductive blunt object such as a plastic or wooden toothpick and gently scoop out lint, dust and other nasty stuff that gets shoved into the port every time you plug it in.

Some power banks and 12V USB car chargers offer ports with different ampere levels.

If your iPad’s charger isn’t plugged directly into the wall outlet, try that first in case any other extension or socket system is at fault. It’s almost never necessary to reboot an iPad, but if your tablet won’t recognize that you’ve plugged power into it, the least you can do is try turning it off and on again.

Often when an iPad’s software has gone completely down, the screen will remain black and unresponsive even when plugging in a working charger. If you’ve done everything on this page and your iPad still won’t charge and power on, you’re probably going to have to make a visit to an Apple store.

My iPad Says Not Charging – How to Fix It?

It can occur when your iPad is not getting the optimum power supply from the charging unit. Make sure to use an MFi-certified charging cable and adapter. If you get the message of not charging on your iPad after re-plugging the USB cable multiple times, a quick reboot can help. Doing so can clear the software issue and solve the charging problem. Long press the button on the top until you see the Power-off slide option on the screen. Swipe the power off slider and wait for a while to let your iPad switch off. After this, long press the Top button until the Apple logo appears on the iPad. Apple suggests that users use MFi-certified charging accessories.

Using a knock-off charging cable or adapter can lead to damage to the battery and other internal parts of your iPad.

So, to get the high-quality charging capacity, make sure to check the MFi certification marked by “Made for iPhone| iPad| iPod.” Also, you can learn to detect counterfeit charging accessories by visiting the Apple Support page. So, one of the things you can try to resolve the issue is by cleaning the charging port of the iPad.

Note: Before starting the cleaning process, make sure to power off the iPad. Apple Official Support Page has designated the moderate operating temperature for iPad from 0 to 35 degrees Celsius. If the temperature gets too hot or too cold, it can obstruct your iPad’s charging and hamper the battery life.

If either of these two is faulty or damaged, it will surely stop charging your iPad.

For this, you can use a separate USB wire, try charging the iPad, and see if the issue vanishes. An outdated iOS on your iPad can result in software bugs obstructing the charging process. So, it becomes necessary that you update your iPad to the latest iOS to resolve the issue.

Why Is My iPad “Not Charging” From a Computer?

Typically, many computer USB ports (especially in older devices) often only output 0.5 amps of current, which isn’t enough to charge your iPad at a reasonable rate—and not enough to power it while in use. If you plug an iPad into a USB port on a computer and see the “Not Charging” message, there are a handful of things you could try. Some newer Macs and PCs might have high-power USB ports that can charge an iPad at a reasonable rate. Buy a new Lightning or USB-C charging cable (whichever your model of iPad needs) or try another one you have on hand.

Buy a new Lightning or USB-C charging cable (whichever your model of iPad needs) or try another one you have on hand. To fix this problem, completely power off the iPad and gently insert a wooden toothpick into the Lightning port to pull out lint.

Sometimes lint or dust can get trapped in your iPad’s Lightning port, creating resistance that might interfere with charging. To fix this problem, completely power off the iPad and gently insert a wooden toothpick into the Lightning port to pull out lint. Ultimately, the best option is to charge your iPad using a USB adapter that plugs into an AC wall outlet.