Despite being a fantastic device with numerous features, is not immune to the occasional issues. In this blog post, we will talk about the different reasons why your iPad won’t turn on like battery drainage or faulty charging cable or adapter. The iPad is experiencing a software crash or glitch causing it to be unresponsive.
Any of the hardware components are not working properly like a faulty power button or damaged battery.
If your iPad Pro isn’t turning on, it could be due to a variety of issues but don’t you worry, as it can be fixed by following a few simple steps. Occasional bugs or glitches in the operating system might stop iPad Pro from turning on. Damages such as drops, impacts, or exposure to water can prevent iPad Pro from turning on. Inspect the device for any visible damages and ensure that the ports are clean and free of debris.
Connect the iPad to a computer and use iTunes or Finder to restore or update the device. Keep the device updated to the latest software version to prevent bugs and glitches. Use a protective case and screen protector to avoid any physical damages. Do not expose the iPad Pro to extremely hot or cold temperatures to prevent battery and hardware damages.
Occasionally clean the device’s ports and screen and perform a restart to keep it running smoothly. If your iPad Pro 12.9 inch won’t turn on, try following the above troubleshooting steps.
Chances are your iPad will have a similar problem no matter what version or model you are using.
So, follow the troubleshooting solutions and if the problem persists seek professional help.
The iPad Air will power on once it detects the current flowing through its circuits. Make sure to charge your iPad on time and before its battery completely runs out.
When an iPad mini drops, it either breaks the screen or damages the motherboard. If your iPad mini won’t turn on, there is a high chance its battery is depleted.
Clean the charging port with a soft fabric and also try drying your iPad mini if you suspect there is a water damage. There is a chance your iPad battery is completely depleted and you will have to wait a little while to check If it charges or not.
Some kinds of software crashes make the iPad completely unresponsive and unable to charge as well. There could be a bent connector or fried cable that is preventing your iPad form charging.
If your iPad Pro won’t turn on even when plugged in, you should follow the same instruction given above. But, if the problem isn’t being solved through the above steps then contact Apple support immediately. Follow all the troubleshooting steps given above and make sure you are using charging equipment from a certified store. Check the charger and cable with another device to ensure they are functioning correctly.
Perform a hard reset by holding the power and volume buttons together until the Apple logo appears. If the issue persists, it’s better to contact the Apple store or any reliable third party service like Simply Fixable.
Do not expose the iPad to extreme temperatures, as it can affect the battery and other components. Use a sturdy case and a screen protector to prevent hardware damage. If it doesn’t work then try charging it for 15 to 30 mins to rule out the possibility of battery depletion. If both these solutions don’t work then seek professional assistance as it might be a hardware malfunction. If your iPad screen is frozen on the Apple logo and doesn’t progress further from that then that indicates a software problem. Number one reason could be that the battery is down causing it stuck on the Apple logo.
An OS update may have gone wrong on installation, which can harm the boot process. How to fix iPad that doesn’t turn on and stuck on Apple logo?
Here is how you can fix iPad that doesn’t turn on and stuck on Apple logo: Make sure you finish all the software’s updates and let the system reboot completely.
If your iPad is not turning on after a hard reset then the problem is serious and could be a Hardware malfunction. Any type of physical stress can damage the iPads internal components and prevent it from turning on even after hard reset.
It can be a perplexing issue when your iPad shuts down abruptly and won’t turn on. There is a possibility that your iPad’s battery was so critically low that it shut down abruptly in order to protect itself.
There was an unexpected software glitch or crash that caused your iPad to shut down and won’t turn on.
There can be some underlying hardware issues that caused your iPad to malfunction and shut down abruptly. However, if we take the proper precautionary measures, we can prevent the issues from occurring in the first place. If you follow these preventative measures, you can reduce the risk of power-related and software problems significantly and enjoy a stress-free experience with your iPad.
*Data in the given table is based on Simply Fixable’s market research and the official Apple website However, if you have the right troubleshooting skills, you can figure out the potential cause and fix it and get your iPad back running. Madi is a dynamic tech writer with a passion for simplifying complex concepts.
Her expertise lies in creating clear and concise guides, blogs, manuals, and tutorials that empower users to navigate the technological landscape with ease.
Throughout her career, Madi has worked with numerous leading tech companies, collaborating with engineers, developers, designers and marketers to create user manuals, FAQs, troubleshooting guides, and tech articles, on the websites such as “Technology Castle” and “Bilzimo”. She can transform intricate technical jargon into user-friendly language, empowering users to understand and utilize products effectively.
If your iPad doesn’t respond
If your iPad has a frozen screen, doesn’t respond when you touch it, or becomes stuck when you turn it on, learn what to do. If your iPad doesn’t turn on, follow these steps to check your hardware and charge your device. If your iPad doesn’t turn on, follow these steps to check your hardware and charge your device. If you see the Apple logo or a red or blue screen during startup, try these steps:
On a Mac with macOS Mojave or earlier, or on a PC, open iTunes. If it takes more than 15 minutes, your iPad will exit recovery mode, and you’ll need to repeat steps 2-4.
iPad Pro Won’t Turn On. 5 Solutions to Get It Fixed
In a world full of modern technology, the Apple iPad is still one of the best and most commonly used tablets worldwide. Its range of features and high-end hardware make it a reliable and popular device. The iPad Pro not turning on is a common issue, but luckily it is easy to fix. These techniques will teach you how to fix this issue in different scenarios while saving you precious time and money.
These reasons will help you know what to do if your iPad Pro stops turning on or shows a black screen. But they don’t realize that background apps or a low-health battery can be entirely dead even if they are not using the iPad.
Apple chargers tend to wear out or completely die after some time, so it is not uncommon. An iPad is made of fragile internal components, so if you dropped it or caused any physical damage, it might be why it’s not turning on. Modern iPad Pros come with a handy, waterproof physical feature, but water can still damage your device if you’re unlucky enough. The first thing you should try is plugging in your charger to your iPad Pro, as the battery might have drained even if it was at 100% the last time you checked. Sometimes the internals of the iPad can be perfectly fine, but the screen is completely dead and does not display anything. If your iPad Pro has been exposed to liquids and is not turning on, immediately dry it using a hair dryer or place it in a container and cover it with uncooked rice, as it will absorb moisture.
If you didn’t act fast enough and the water damage has killed the internals, seek help from Apple support. If your iPad Pro has frozen, try a hard reset to force it to restart and clear its temporary memory. It might be a software issue like the iOS is corrupted and not allowing the iPad to function properly. If your iPad Pro is not turning on and showing a black screen, there are multiple easy and quick fixes for this problem.
Hardware failure issues, such as a malfunctioning component, like the display or logic board, could prevent the device from turning on. How to fix iPad Pro Won’t Turn On and Shows Black Screen?
Contact Apple support or Simply Fixable if you face any hardware issues or physical damage and get them repaired. After that, push down the side button and hold it until a restart is forced on your iPad Pro.
If it is defective out of the box, claim your warranty from Apple and get the device repaired and replaced for free.
Connect your iPad Pro 11 to a computer and use the iTunes software to restore the device.
Now that you have successfully recovered your iPad Pro from this issue, here’s a list of ways to prevent this in the future: Make sure your iPad Pro is regularly charged, and the battery has reasonable health.
Handle your iPad Pro with care and use a protective case to avoid any physical damage. Restart your iPad Pro occasionally to allow the memory to refresh and clear any temporary glitches.
If you are unable to do so, it is better to take your iPad to a nearby Apple repair service or Simply Fixable.
*Data in the given table is based on Simply Fixable’s market research and the official Apple website Madi is a dynamic tech writer with a passion for simplifying complex concepts. Her expertise lies in creating clear and concise guides, blogs, manuals, and tutorials that empower users to navigate the technological landscape with ease.
Throughout her career, Madi has worked with numerous leading tech companies, collaborating with engineers, developers, designers and marketers to create user manuals, FAQs, troubleshooting guides, and tech articles, on the websites such as “Technology Castle” and “Bilzimo”. She can transform intricate technical jargon into user-friendly language, empowering users to understand and utilize products effectively.
Ipad pro 2022 not turning on
Force restart iPad (models with the Home button) If iPad still doesn’t turn on, or if it gets stuck during start up, see the Apple Support article If your iPhone, iPad, or iPod touch won’t turn on or is frozen. If you continue to experience difficulties, you will need to seek assistance directly from from Apple Support. You might also visit the Genius Bar at your local Apple Store or Apple Authorised Service Provider (AASP) – where the technicians will be able to test and assess your iPad:
3 Main Reasons Your iPad Won’t Turn On (With Solutions)
We’ve looked at the common reasons an iPad tablet won’t switch on based on our experience. If your device is not turning on or charging, the issue could be the charger, software corruption or physical damage. If you have been charging the device successfully up until now the problem could be an accumulation of dirt and dust on the lightning port. Though not common, this problem can happen if you use the phone in dusty areas or your carry bag or cover has loose fibres or dirt.
Carefully inspect the port and remove any debris/dirt with a toothpick or, preferably, a soft brush. Apple users sometimes report software crash issues which makes the iPad inaccessible when restarted.
Hold the iPad’s home button while still connected to the computer and continue for some seconds until iTunes automatically recognises your device. Slowly release the home button when iTunes displays a message that an iPad was detected in recovery mode.
The size of an iPad is an advantage to the users but it makes the device more susceptible to physical damage if it is dropped or bumped. Check whether buttons are functioning correctly and whether the charging port is damaged or has got dust or dirt in it, as noted earlier.
If none of the above solutions work or there is evidence of major physical damage then it is time for a professional repair. You can contact our technician team for advice or opt for our send-in repair service.
If none of the issues above applies then it may be that your device is charging ok (you have power) but won’t turn on or boot up. The reasons why your charged iPad won’t turn on could be a software issue or physical damage.
You can perform a hard reset by simultaneously pressing the power and home button until you see Apple’s logo in the centre of the screen.
All being well the tablet will turn on shortly after, proving that a software problem was causing the startup issue. The only option left if restoring the device does not work is to contact a professional repairer like us in order to move forward. If you work through the abridged series of options and steps carefully and in order, you will solve many issues that can cause an iPad to not switch on.
iPad Won’t Turn On? Here’s What To Do
I’m also going to take a look at the infamous “black screen of death”, and cover what users can do if this is occurring. If you’re having issues with your iPad Pro not turning on, it may be an easy fix, or you may find yourself in need of contacting Apple Support, depending on the severity of the situation.
According to reports on the internet, users can have an issue where their iPad Pro mysteriously turns off for no reason.
If your iPad Pro is frozen or you are experiencing a black screen, there’s a couple of different things you can try to avoid this. Of course, if you are stuck on the black screen of death, you can force your iPad Pro to restart. Next, one of the other things you are going to want to do is give your iPad Pro a charge to see if the issue is that it is running out of juice. Virtually every Apple device will power-on automatically once it receives enough power, so it’s rather easy to rule out this issue. Of course, you may not actually be experiencing the black screen of death, rather, you may simply be dealing with an iPad that has its brightness setting turned all the way down. If you’re using an older version of iPadOS, access the Control Center by dragging up from the bottom of your screen. If you are still having issues with the black screen of death, you can update iPadOS to the newest version available for your device. Note that since this may require entering the password on your iPad, this isn’t going to work if you are completely unable to see your screen. If this the issue, then placing your iPad Pro into Recovery Mode and then updating it or restoring it may do the trick, though, as mentioned, you’re going to have to do a bit of guesswork, as you won’t be able to see certain prompts on your screen.
First, connect your iPad to either a Mac or PC and then open iTunes or a Finder window. DFU mode lets an iPad Pro experiencing problems to still have communication with iTunes or Finder. Time needed: 5 minutes If your iPad Pro has Face ID, hollow these steps. Press and hold the Power button for three seconds, or until the screen turns black.
If you see the icon stating to plug the device into a machine, you’ve held it down too long. If you have a black but illuminated screen, your iPad Pro is successfully in DFU mode.
If your iPad Pro has a Home button, follow these steps to enter DFU mode. Turn off your iPad by holding the power button for three seconds and sliding the Shut Down slier to the right. If the iPad keeps a black screen that is illuminated, you’ve successfully entered DFU mode. It’s worth reiterating that these steps will obviously be hard to follow if your screen is completely black.
However, it’s at least worth trying, for if your iPad Pro is still not turning on, you’re going to need to contact Apple Support. However, if you find that your iPad screen isn’t turning on at all, you can either try these steps blind, or you will need to contact Apple Support.
While having an iPad Pro that is not turning on is obviously no good, there are some steps you can take to try and remedy it. Considering the investment an iPad Pro can be for many people, users are obviously going to want an experience that works well for them.
Be First to Comment