Press "Enter" to skip to content

Phone Holder Review

Only the large 6.5-inch iPhone XS Max gave them some trouble when held horizontally, although the mounts were rock solid with a 6-inch Pixel 2 XL. And it can tilt a full 90 degrees back or to the sides, which makes it ideal for sloping or vertical surfaces. The MagicMount Dash’s magnetic attachment performed the best in our testing, holding even a large iPhone XS Max securely everywhere we drove. The latest iOttie models offer the best combination of fast charging, serious stability, and easy adjustability.

The Best Car Phone Mounts for 2021

A good car phone mount is an essential accessory for any vehicle that doesn’t include a built-in navigation system. Your vehicle’s DC port powers these mounts and save you from needing to plug in your phone each time you hop in the car. This budget-friendly model works on most standard car vents and can easily accommodate phones with displays up to 6.7 inches wide, including those with thick cases. Simply slide your phone in the mount and the clamps automatically slip into place for a perfect fit.

When you’re ready to remove your phone, tap the button on the bottom of the mount to release the clamps. Beam Electronics Universal Smartphone Car Air Vent Mount $9.99 at Amazon See It The Beam Electronics Universal Smartphone Car Air Vent Mount features a bottom bracket for support, along with arms you press into place. And there’s no need to worry about draining your phone’s battery, as the mount offers built-in 10W Qi wireless charging. It works with Alexa’s Auto Mode and turns your phone’s display into a mini navigation panel.

Built-in microphones can easily hear your voice prompts over music and road noise, and the dock connects to your car’s speaker system via the aux jack or Bluetooth. In addition to its support for Alexa, the Aivo Connect features 10W Qi wireless charging, an IR proximity sensor that automatically opens and grips your phone, and a twist locking mount that can attach to your dashboard or windshield. The mount supports both landscape and portrait modes; the ball joint pivots so that you can adjust your phone to any viewing angle. The 10W Qi wireless charging pad features foreign object detection and automatically turns off in hot conditions to protect your phone from overheating.

In addition to a spring-loaded arm to hold your phone in place, the Miracase has a bottom ledge for extra protection. A 360-degree rotating head allows you to quickly switch between vertical and horizontal orientations, as well as adjust the tilt angle of your phone. The mount supports wireless charging up to 10W and uses a powerful magnet array to hold your phone. With a rubberized anchor that attaches to standard air conditioning vents, the Steadiboost takes seconds to install and is easy to adjust.

Best Car Phone Mount (Review) in 2021

With decades of combined experience covering the latest news, reviewing the greatest gear, and advising you on your next car purchase, The Drive is the leading authority on all things automotive. Today’s smartphones pack over 100,000 times more power than the computers that guided astronauts to the moon and back 50 years ago. Read on for what we hope is at least a partial answer to the smartphone take on the space-age phrase: If we can put a man on the moon, why can’t we make a car phone mount that works? THIS IS A DRIVE HANDS-ON REVIEW Mike Bumbeck When he’s not wrestling with one or more first-generation Mitsubishi Monteros and other fine ‘80s-era Japanese cars and motorcycles, Mike Bumbeck evaluates a constant variety of automotive products from The Drive’s clandestine Science Barn testing facility in New England.

Why Trust Us Our reviews are driven by a combination of hands-on testing, expert input, “wisdom of the crowd” assessments from actual buyers, and our own expertise. These fakes were surprisingly accurate, with metal frames, glass backs, and ports and controls in the right places, just like their fully operational counterparts.

We used adhesive wheel balancing weights to hit the desired number, and even threw on a bit extra to account for cases and screen protectors. Mike Bumbeck Our heavyweight faux display phones tower over our daily driven Google Pixel 3A XL with cloth case.

We know some new car dashboards are expansive enough to create their own mirages, but a long gooseneck with a heavy slab of metal and glass mounted on one end is going to wobble. We know some new car dashboards are expansive enough to create their own mirages, but a long gooseneck with a heavy slab of metal and glass mounted on one end is going to wobble.

That mirror mount phone holder is all fine and good until the windshield adhesive or ball joint fails and drops the lot into your morning coffee. Besides, while laws against hanging things from rearview mirrors vary by state and are rarely enforced, you don’t want to give the authorities a visible reason to pull you over.

That mirror mount phone holder is all fine and good until the windshield adhesive or ball joint fails and drops the lot into your morning coffee. Besides, while laws against hanging things from rearview mirrors vary by state and are rarely enforced, you don’t want to give the authorities a visible reason to pull you over. Best Overall iOttie Easy One Touch Check Latest Price High-quality materials, a washable and reusable suction cup car mount, and an innovative snap-tight phone holder earned the iOttie Easy One Touch our best overall car phone mount pick. A quick cleanup, positioning, and one push on the locking lever fixed the suction cup firmly in place.

If the suction cup doesn’t work out, the vent-type car mount features a beefy wingnut with a threaded brass insert that cinches the jaws onto the vanes with authority. Squeezing the ratcheting side clamps secures the phone in the holder, and pressing a button releases tension for removal. Adjusting the cradle for the right viewing angle was a cinch, and the padded jaws maintained a firm grip without fail. The faux carbon fiber finish left us wishing for a grippier material, but dual mounting options and stable operation make the Anobil Easy Clamp a secure and versatile choice.

This setup is far easier to adjust and tighten down than others that put the ball joint cup and threaded ring on the phone holder’s back.

The clip mounts seemed like an excellent idea for our application, but none of the rectangular dash shapes were compatible with the built-in curve of the top arm of the clamp. The tension phone holder worked well once we peeled off a metal logo plate inexplicably stuck onto the silicone pad. Despite our best efforts, we glued on the base in the wrong direction for vertical adjustment and ran into viewing angle issues.

The magnetic phone holders have a soft-touch plastic coating with a threaded ring collar on the back for adjustment. The machined aluminum alloy mount and magnet housing had a black anodized finish, and the steel ball joint allowed for 360-degree unidirectional adjustment. Alloy construction gave the Coolpow mounts a premium feel, and the steel ball joint offered just the right amount of resistance during adjustment and held fast while driving.

Powerful magnets underneath a soft silicone pad grabbed onto the steel plate and held onto the heaviest and largest phones without slipping over rough terrain.

Mike Bumbeck Our best overall car phone holder in action with an operational Samsung Galaxy Note 9 flagship heavyweight.

Best car phone mounts 2021: tested and rated

Finding yourself the best car phone mount can be the difference between making it to your destination in once piece and missing that concert you’ve been looking forward to since the start of the pandemic. That may sounds extreme, but being able to keep your phone, and the navigation app, in view isn’t as easy as you might have thought.

While they don’t tend to break the bank, the Black Friday deals season is here and offering discounts on all manner of products. Those are the oddities, the mounts that clip into things, slip into cup holders, or something else equally as strange. The name is a mouthful, but it’ll fit in any car with a CD player and kept an iPhone 12 Pro firmly in place. Not only does it work with pretty much every phone out there, it also comes with built-in cable management to help keep your dash board tidy.

Using a cup holder isn’t the most obvious place to keep your phone mount, but it works surprisingly well. Thanks to its long neck and sturdy construction, this holder will position your phone high enough so it’s easy to see while keeping it out of your field of vision. You’ll lose a place for your skinny latte of course, but that’s the price you pay for not being too hot or cold or worrying that your phone will fall at any moment. 2. iOttie Easy One Touch 4 CD Slot Mount Putting your neglected CD player to good use Specifications Price: $20 Wireless Charging: No Color: Black Orientation: 360-degree Type: CD Slot TODAY’S BEST DEALS View at Amazon View at Amazon View at Walmart 11 Amazon customer reviews ☆ ☆ ☆ ☆ ☆ Reasons to buy + The mount can be rotated into portrait and landscape + Using a CD player slot means you don’t lose an air vent or have to make sure it’s mounted firmly on your dashboard + The mount is strong and doesn’t move when you tap or rotate your phone Reasons to avoid – Not all cars have CD players – People who need to use the included Bracket might have a battle on their hands – No charging capabilities Once set up, your phone isn’t going anywhere and the chances are good that your CD slot will be high enough that your screen is never more than a quick glance away. Read the full iOttie Easy One Touch 4 CD Slot Mount review

Specifications Price: $25 Wireless Charging: No Color: Silver Orientation: 360-degree Type: Vent TODAY’S BEST DEALS View at Walmart View at Crutchfield Check Amazon Reasons to buy + The mount can be rotated into portrait and landscape mode + Construction is solid and will stand up to daily use + Cable management is a feature other mounts don’t have + Nice soft grips mean your phone won’t be damaged Reasons to avoid – There are cheaper options – The mount doesn’t charge your device – Some larger phones might not fit if they’re wearing a case Belkin included an area for you to keep your charging cable so it doesn’t fly around your car when you aren’t using it, and it’s surprisingly effective. Similar to the iOttie CD Slot Mount, the Belkin accessory is small and slim enough that it doesn’t stand out even when it isn’t being used.

4. iOttie Easy One Touch 5 Smartphone Car Mount Proving suction cups don’t have to be terrible Specifications Price: $30 Wireless Charging: No Color: Black Orentiation: Portrait and Landscape Design: Suction Cup TODAY’S BEST DEALS View at Amazon View at Best Buy View at BHPhoto Reasons to buy + You don’t lose any air vents + Once attached it will definitely stay that way + Putting your phone into the holder is a cinch + The telescopic arm gives you more flexibility than other mounts Reasons to avoid – Getting the mount off the dash can be a real battle – Pretty big and can get in the way when not in use – As good as that suction cup is, you still need a surface to attach it to We’ll preface this by saying that a lot of people don’t normally rate phone holders with suction cups. Like some of the best mounts, this one holds your phone rock steady when you’re driving around, and putting the device into the holder is a simple one-handed affair. Sandmarc Active Car Mount For the people who want magnetic charging Specifications Price: $60 Wireless Charging: Up to 7.5W Color: Silver Orientation: Vertical Type: Vent TODAY’S BEST DEALS Check Amazon View at Sandmarc Reasons to buy + Strong magnets to hold your phone steady + Charges your phone while you drive + Looks the part, unlike some cheaper options + Come with a charging cable in the box Reasons to avoid – Arguably on the pricey side – Works best with iPhone 12 and MagSafe, needs a magnet to use it – Clip mechanism means you need something to attach it to YOSH Car Phone Mount Holder Magnetic Air Vent The cheap and cheerful option Specifications Price: $11 Wireless Charging: No Color: Black Orientation: 360-degree Type: Vent TODAY’S BEST DEALS View at Amazon View at Amazon 37 Amazon customer reviews ☆ ☆ ☆ ☆ ☆ Reasons to buy + The magnets are strong and your phone won’t budge from the holder + Almost invisible when you aren’t using it + Comes with multiple magnets in the box so you can use two phones with it Reasons to avoid – You’ll lose an air vent – The mount won’t charge your phone and magnets don’t support MagSafe The only potential issue with this holder is the fact you need to affix a disc to the back of your phone — something for the magnets to attach to, basically. The PopSockets PopMount 2 Car Dash holder has a strong suction cup that should do the trick on most dashboards. You’ll also need to take your phone’s unique qualities into account, like if it has MagSafe or you need something that can accommodate a PopSocket or similar stand. Testing begins with making sure the holder itself is able to find a solid grip on whatever part of the car it’s supposed to attach to — windscreen, air vent, etc — and that it will hold a phone in place while driving.

From there, it’s a case of seeing how easily a phone can be inserted and removed, how well any movable parts work, and whether any additional features do their jobs well.

Best Car Phone Mount of 2021

Stable Ease of use Great variety of mounting options Integrated cable management Semi-permanent installation Simple to set up Easy phone installation Small size and inexpensive Low stability score Requires adding magnets to your case

If the magnet isn’t centered on the case, there is a decent chance the phone will spin on bumpy terrain. We should note that we encountered both of these issues with every car vent phone mount with a similar design. Although the setup is more complicated than other vent mount options, the threaded pinch mechanism offers the most secure interface. Although this makes it much harder to adjust, once you find a viewing angle you like, it is much more secure and stable to touch.

But the same bulk adds some protection to prevent your phone from overheating on those cold days when the heater is blasting. Lots of adjustments Stable mount Doesn’t work on all dashboards Large size makes it hard to store

The suction cup provides a lot of versatility for mounting positions on your windshield or dashboard. This mount is one of the most stable models that we tested, keeping your phone steady throughout your drive. We couldn’t get the suction mount to stick to some dashboards, especially cars with pebbled or sloped surfaces. Our reviewers did not love all the excess screws and hinges and buttons and clamps of this mount, but once it is set up and out of the way, feels more manageable to deal with.

With a sticky adhesive bottom, this silicone cradle mounts easily on your dashboard, is unobtrusive, and keeps your phone at a perfect viewing angle with its charging port accessible. Because there are no moving parts, it’s incredibly easy to use with one hand — simply place or remove your phone from its secure rubber groove. The manufacturer states that the sticky rubber bottom can be cleaned and reused, but we are skeptical of how long the adhesive will truly last. But so far, it has managed to survive hot days sitting in the sun without losing its adhesion, and overall we are quite pleased by the simplicity and performance of this product.

The bottom supports to the cradle are not adjustable, which can be an issue for phones with headphone jacks or off-center charging ports. This means that if you flip the switch in the wrong direction, you have to go all the way back across to achieve the desired tightness. It also has a spring-loaded mechanism that pinches the vent to increase its stability while keeping installation easy. Once installed, the spring-loaded phone interface is easy to operate with one hand and offers the ability to adjust the viewing angle with a swivel.

The biggest one we found is that on rougher roads, the clamp tends to lose its grip on the phone — and suddenly, you’re in a potentially dangerous situation.

Small form Inexpensive Easy to install Tends to slip out of the vent Expensive compared to similar designs

This is a great option for those with smaller cars and dash space or those who don’t like their vents to be blocked by a phone holder. Its base comes with attachments to help the phone mount fit snugly into different sized cup holders, and its gooseneck allows for endless viewing angles and adjustability.

However, this phone mount is large and bulky, taking up not only valuable cup holder space but also being a bit cumbersome with its long gooseneck, which comes very close to our gear shifter in our Toyota Tacoma. Our last gripe is that the cradle does not attach securely to the gooseneck, making it easy to come unattached while trying to adjust the viewing angle — a definite downside. Chris, along with Jason Peters and Miya Tsudome have been using car phone mounts for over a decade and have tested more than 30 different models throughout the years. We then used each model independently on long drives and road trips to assess durability and identify any quirks that could only be revealed through extended use.

Its adhesive back held fast to whatever we stuck it to, and it included the side benefit of being very versatile in its placement location. If you don’t mind a semi-permanent installation, the Scosche MagicMount Pro Universal is our favorite mount that keeps the vent clear. Vent mount options typically keep the phone conveniently close to the driver, but can potentially block airflow. Made to adjust to different sized cup holders, the TOPGO phone mount is stable and easy to use.

On smooth roads, the Scosche MagicMount Pro VNT and Maxboost Magnetic were stable enough, but when the terrain got rough, they seemed to be the first to fall off.

Because vent attachment models are secured to only a thin sheet of plastic, they are more prone to being impacted by a vehicle’s vibration. This took an average of two minutes to clean the phone for a reliable connection, line up the placement just right, and then finally stick it on. The adhesive is strong enough that you don’t have to fuss with your tactics when taking the phone off — just pull it off in any direction.

The IOttie Dash & Windshield Mount had a small learning curve to figure out how to pinch and remove. Installing your phone is as simple as placing it in the silicone cradle, with no moving parts to adjust to put it in or take it out.

The vent-pinching mechanism also adds security to the mount, making it easy to install and uninstall your phone. But because of its simple cradle design, it can accommodate larger phones with ease that may struggle to stay upright on other models.

Best car phone holders 2021: keep your phone safe while you’re driving

Not only can the best car phone holders keep your pride and joy in pristine condition, you’ll also be able to enjoy its full potential while it’s both safe and secure to do so. We haven’t had all of these car phone holders in our test labs yet, but based on our experts’ opinion and knowledge of the most reputable brands around, we think these are worth looking at. Our selections take into account online reviews, brand reputation, product capability, or unique features, to help you pick through the maze of choices available to you. The Scosche MagicMount is a brilliant little phone holder that’s ingenious in that it can let you attach your smartphone if more traditional accessories aren’t quite up to the job.

It’ll work a treat on many surfaces, including vertical areas of your dash as well as less practical locations where other phone holders can’t even get near. Considering it uses an adhesive pad to grip, the holding ability seems reassuringly robust, even with heavier and larger handsets.

One of the most impressive we’ve tried is the Kenu Airframe Pro, which in the tradition of car phone holders goes for a ‘less is more’ approach on the design front. Again, top marks go to iOttie for designing a unit that’s very nicely made and there are variations so you can choose between dashboard or windshield mounting, cup holder and vent editions too. The telescopic arm on the one we tried was fab too, with an additional pivot capability that delivers plenty of scope for viewing your phone screen no matter where you’ve got it mounted.

You’ll need to check the compatibility of your own handset in terms of the wireless charging feature, but aside from that there’s plenty to like about this model in all its different guises. Not so with the TechMatte edition as it attaches to a variety of dashboard vents without fuss or, indeed, leaving marks, scratches or scuffs in the process. Meanwhile, your phone is kept safe and secure thanks to a seemingly invincible magnetic mount, which delivers plenty of dependable performance.

Considering this is a budget solution the TechMatte accessory is a great option, especially if you tend to jump from one car to another, perhaps in a workplace scenario, where you won’t be too heartbroken if you accidentally leave it behind one day. Add in the ability to air-lock the pad in place and you’ve got a robust in-car solution that doesn’t leave you feeling nervous that it might suddenly pop off as you’re driving along. Going for a dashboard mounting option makes for the optimum position for an in-car phone holder anyway as it leaves your windshield free from any kind of obstruction. As with the many other models here, the Arteck Car Mount benefits from a 360-degree rotational design, which means you can easily get your handset into a prime position prior to a journey and then not have to worry about it again. While the grip is definitely reassuringly snug, the Arteck Car Mount is still kind to your handset, which is pretty good for such an affordable bit of kit. One slight trade-off with the wide range of positioning options that come with the Exshow Car Mount is that the accessory can tend to throw a little bit of wobble into proceedings. With its 30cm arm you’re able to move the viewing angle into many different positions and orientations, which makes the Exshow Car Mount mighty handy for taller or shorter drivers due to its generous reach. Another reason the Vicseed Car Phone Mount appeals is its ability to give a home to a wide variety of handsets. In fact, it’ll cope with just about any smartphone you can think of, although as always our advice is to check the compatibility details just in case you’re using a phone from years ago. Usefully, there’s a one-button release system, which is a really practical consideration so you don’t have to fight with the accessory if you’re stopped and want to quickly get hold of your phone. The design is impressive and features a neat way of adjusting the cup holder clamps so that you get a snug fit that won’t move while you’re in transit. However, once it’s in position in the cradle the handset can be moved 360 degrees thanks to the gooseneck, which is solidly constructed but wonderfully flexible in equal measure.

This is another absurdly simple but really quite clever car phone holder that can give a safe, secure and road-legal home to many popular smartphones. And, perhaps more impressively, for something so unobtrusive the Yosh Car Phone Holder can keep any kind of screen in a stable position, including tablets. However, the solid grip that you get thanks to the magnetic aspect means that your smartphone (or tablet) stays nicely in place once you’ve positioned it.

Best phone mounts and holders for cars

We get it, for many people who don’t have a standalone GPS in their car, a phone is an indispensable navigation aid, not to mention quite useful for hands-free communication when in transit. Given it’s centrality as a travelling companion, it deserves a proper mount to keep positioned within line of sight and out of your mitts.

1. iOttie iTap 2 Magnetic Air Vent Mount MSRP: $29.95 Best Prices Today: Like its competition, iOttie’s iTap 2 Magnetic Air Vent Mount slides easily onto horizontal and vertical slats—but then it one-ups them with a clamp that squeezes on the rubber clip for a secure hold. You also get a firm lock when placing a phone on the iTap 2’s magnetic surface, whether you use either of the two metal plates included or any random one that you’re already using.

At its street price of $25, the iOttie iTap 2 Magnetic Air Vent Mount is worth the extra cash—especially since it travels well, too. The hinge continued to keep my iPhone held upright without sagging, and the mount stayed firmly clasped to the air vent without falling off due to my phone’s weight. They don’t block your view or muck up your dashboard with adhesive, and they work with cars lacking a CD player. It’s minimalist in design but durable, with a spring-loaded side clip big enough to fit the even large phones like Plus-model iPhones and Galaxy Notes.

The magnet combination is rated to hold today’s largest phones, such as the Galaxy Note 8 or iPhone X, and in my experience with a Pixel XL, the device remained secure while making the screen visible as I drove. The included magnet in the iTap 2 Wireless was strong enough to hold an iPhone XS Max in place without fear of it falling while driving.

This phone holder uses an adjustable, solid metal hook that extends to slide through a vent (from 3/8” to 1” deep) and over its horizontal louvers. As a final bonus, the manufacturer offers a lifetime warranty: Send Square Jellyfish a picture of the problem, and the company will ship a replacement, free of charge.

Be First to Comment

Tinggalkan Balasan

Alamat email Anda tidak akan dipublikasikan. Ruas yang wajib ditandai *

Mission News Theme by Compete Themes.