In a world full of modern technology, the Apple iPad is still one of the best and most commonly used tablets worldwide. Its range of features and high-end hardware make it a reliable and popular device.
The iPad Pro not turning on is a common issue, but luckily it is easy to fix. These techniques will teach you how to fix this issue in different scenarios while saving you precious time and money.
These reasons will help you know what to do if your iPad Pro stops turning on or shows a black screen. But they don’t realize that background apps or a low-health battery can be entirely dead even if they are not using the iPad. Apple chargers tend to wear out or completely die after some time, so it is not uncommon. An iPad is made of fragile internal components, so if you dropped it or caused any physical damage, it might be why it’s not turning on.
Modern iPad Pros come with a handy, waterproof physical feature, but water can still damage your device if you’re unlucky enough. The first thing you should try is plugging in your charger to your iPad Pro, as the battery might have drained even if it was at 100% the last time you checked. Sometimes the internals of the iPad can be perfectly fine, but the screen is completely dead and does not display anything. If your iPad Pro has been exposed to liquids and is not turning on, immediately dry it using a hair dryer or place it in a container and cover it with uncooked rice, as it will absorb moisture.
If you didn’t act fast enough and the water damage has killed the internals, seek help from Apple support. If your iPad Pro has frozen, try a hard reset to force it to restart and clear its temporary memory. It might be a software issue like the iOS is corrupted and not allowing the iPad to function properly. If your iPad Pro is not turning on and showing a black screen, there are multiple easy and quick fixes for this problem. Hardware failure issues, such as a malfunctioning component, like the display or logic board, could prevent the device from turning on. How to fix iPad Pro Won’t Turn On and Shows Black Screen?
Contact Apple support or Simply Fixable if you face any hardware issues or physical damage and get them repaired. After that, push down the side button and hold it until a restart is forced on your iPad Pro.
If it is defective out of the box, claim your warranty from Apple and get the device repaired and replaced for free. Connect your iPad Pro 11 to a computer and use the iTunes software to restore the device.
Now that you have successfully recovered your iPad Pro from this issue, here’s a list of ways to prevent this in the future: Make sure your iPad Pro is regularly charged, and the battery has reasonable health.
Handle your iPad Pro with care and use a protective case to avoid any physical damage. Restart your iPad Pro occasionally to allow the memory to refresh and clear any temporary glitches. If you are unable to do so, it is better to take your iPad to a nearby Apple repair service or Simply Fixable. *Data in the given table is based on Simply Fixable’s market research and the official Apple website Madi is a dynamic tech writer with a passion for simplifying complex concepts. Her expertise lies in creating clear and concise guides, blogs, manuals, and tutorials that empower users to navigate the technological landscape with ease.
Throughout her career, Madi has worked with numerous leading tech companies, collaborating with engineers, developers, designers and marketers to create user manuals, FAQs, troubleshooting guides, and tech articles, on the websites such as “Technology Castle” and “Bilzimo”. She can transform intricate technical jargon into user-friendly language, empowering users to understand and utilize products effectively.
iPad won’t Charge. 5 Reasons Why It Happens and How to Fix
This article will explore the common reasons why an iPad might not charge and offer solutions to get you back up and running. From investigating software glitches to replacing the charger, we’ll guide you through troubleshooting techniques that could save both time and unnecessary stress.
The frustration of discovering that your iPad won’t charge can be overwhelming, especially when you rely on it for various daily tasks. An unresponsive, dead iPad that doesn’t charge can signify potential battery or hardware issues.
If the issue persists, seek professional help from an Apple service provider or Simply Fixable. Test with a different wall outlet or USB port to rule out power source issues.
If physical damage is suspected, consult an Apple professional or authorized service provider like Simply Fixable for a proper diagnosis and repair. Connect the iPad to iTunes (or Finder on macOS Catalina and later) and attempt a restore if it’s recognized.
Leave the iPad connected to a charger for a significant time (such as overnight) to see if the battery revives.
Carefully inspect and clean the charging port to ensure a proper connection with the charger. Utilize an Apple-certified charger with the correct wattage and a USB-C or Lightning cable, as appropriate for your model. If basic troubleshooting doesn’t resolve the problem, schedule an appointment with an Apple or Simply Fixable to repair your device.
Reboot the iPad Pro to refresh its internal systems, potentially resolving software-related charging issues. Inspect the charging port for any visible impairments and gently clean it using a soft cloth or brush. If these strategies fail, it is advisable to contact Apple Support or visit the Simply Fixable store. When an iPad Air refuses to charge, it might be due to outdated software, degraded battery, or accessory defects. If the iPad Air can be turned on, check for any available software updates and install them to fix any charging-related bugs possibly. An iPad Air that neither turns on nor charges could be experiencing complex hardware failures or battery malfunctions.
A severe software glitch may have locked the system, preventing the device from powering on or charging. Connect the iPad Air to an Apple-certified charger and cable, then leave it plugged in for an extended period, such as a couple of hours. If possible, connect the iPad Air to a computer with iTunes and try restoring it if it recognizes the device.
Reboot the device to clear potential software bugs and install the latest updates if available. An iPad stuck at 1 percent charge typically suggests battery health issues or underlying software glitches. A specific software malfunction may cause the device to misread the actual battery level.
Restart the device to possibly resolve any software glitches that could be causing the incorrect battery reading. Attempt to reset all settings (without erasing data) on the iPad to revert any configuration affecting charging. If an iPad rapidly loses charge, it may be caused by excessive power consumption from apps or a failing battery. A software issue could affect the power management system, causing the battery to discharge rapidly. Ensure that the charging cable and adapter are securely connected and plugged into a working power source. Carefully inspect the charging port on the iPad for any visible anomalies and gently clean it, if necessary, using a soft cloth.
As the iPad is new, it is advisable to contact Apple Support or the retailer where it was purchased, as a warranty or return policy may cover the issue. If an older iPad won’t charge, several factors could be contributing to the problem. To resolve this issue at home, it is advisable to restart your phone, check the battery to see if that needs to be replaced or clean any dirt or debris in the charging port.
Regularly inspect and carefully clean the charging port to prevent dust and debris from causing connection issues. Pay attention to how your iPad’s battery performs and consider a professional replacement if you notice significant degradation. If all of this doesn’t work, it’s best to take your iPad to Simply Fixable, where their expert technicians will resolve the issue at affordable costs.
*Data in the given table is based on Simply Fixable’s market research and the official Apple website Her expertise lies in creating clear and concise guides, blogs, manuals, and tutorials that empower users to navigate the technological landscape with ease.
Throughout her career, Madi has worked with numerous leading tech companies, collaborating with engineers, developers, designers and marketers to create user manuals, FAQs, troubleshooting guides, and tech articles, on the websites such as “Technology Castle” and “Bilzimo”.
She can transform intricate technical jargon into user-friendly language, empowering users to understand and utilize products effectively.
How to Fix the iPad Black Screen of Death
This step forces a hardware shutdown that should override any software glitches that prevent normal operation. If your iPad presents a black screen, the problem could be that the battery is depleted.
If the battery is too low to support a low-battery message, the iPad doesn’t have enough power to display the charging symbol.
If the iPad is too hot or too cold, it won’t charge.
If you frequently experience a full battery discharge problem, a rogue app may be the culprit. Use a non-metal tool, like a wooden toothpick, to dislodge the dust, then charge the device again.
The iPad may be on, but the screen isn’t visible because the brightness setting is too dim. On iOS 12 or iPadOS 13, swipe down on the upper-right menu to access screen brightness.
If you tried all the above fixes and your iPad screen is still black, try a system update. A System Restore is your last resort, as this step erases the data on the iPad. If you haven’t, take your device to an authorized Apple repair technician to see if there’s a problem with the screen or if another hardware glitch affects your iPad.
If your screen isn’t working
If your screen works after removing an accessory, try using a different outlet, cable, or charger. If your screen still isn’t working, you might need to set up service for your device.
My iPad Pro won’t start or charge
This step is advised as a battery with very low charge, or is failing, may produce symptoms that emulate a boot loop. If the problem fails to stabilise after an hour, whilst still connected to the Power Adapter, attempt a forced restart of the iPad: Restore your iPhone, iPad or iPod to factory settings – Apple Support If you don’t have access to a suitable computer of your own, that of a helpful friend or family member will suffice.
Dive into anything
Saturday my ipad died and i hooked it up to the charger left came back home and noticed it had not charged.
3 Main Reasons Your iPad Won’t Turn On (With Solutions)
We’ve looked at the common reasons an iPad tablet won’t switch on based on our experience. If your device is not turning on or charging, the issue could be the charger, software corruption or physical damage. If you have been charging the device successfully up until now the problem could be an accumulation of dirt and dust on the lightning port.
Though not common, this problem can happen if you use the phone in dusty areas or your carry bag or cover has loose fibres or dirt.
Carefully inspect the port and remove any debris/dirt with a toothpick or, preferably, a soft brush. Apple users sometimes report software crash issues which makes the iPad inaccessible when restarted. Hold the iPad’s home button while still connected to the computer and continue for some seconds until iTunes automatically recognises your device. Slowly release the home button when iTunes displays a message that an iPad was detected in recovery mode. The size of an iPad is an advantage to the users but it makes the device more susceptible to physical damage if it is dropped or bumped. Check whether buttons are functioning correctly and whether the charging port is damaged or has got dust or dirt in it, as noted earlier. If none of the above solutions work or there is evidence of major physical damage then it is time for a professional repair. You can contact our technician team for advice or opt for our send-in repair service.
If none of the issues above applies then it may be that your device is charging ok (you have power) but won’t turn on or boot up. The reasons why your charged iPad won’t turn on could be a software issue or physical damage. You can perform a hard reset by simultaneously pressing the power and home button until you see Apple’s logo in the centre of the screen. All being well the tablet will turn on shortly after, proving that a software problem was causing the startup issue.
The only option left if restoring the device does not work is to contact a professional repairer like us in order to move forward. If you work through the abridged series of options and steps carefully and in order, you will solve many issues that can cause an iPad to not switch on.
How to fix iPad Pro that won’t turn on
If your Apple iPad Pro no longer powers on, there are always three possibilities; the battery might have been drained, the firmware may have crashed or it could be an issue with the hardware. Continue reading as I will share with you the most effective solutions when an iPad won’t turn on. The first thing we need to deal with is the fact that the majority of problems like this, wherein the device won’t turn on and not responding, is just because of a firmware crash. When it happens, your tablet would no longer respond to the normal reboot procedure and since it has a non-removable battery, you can’t just take the back cover off and pull it out.
Now, it’s time to rule out the possibility that your iPad Pro has just completely drained its battery that’s why it would no longer power on. The good thing about Apple devices is that they will be powered up automatically once the system detects there’s sufficient battery so if it would respond to its charger, then that’s the end of the problem.
I hope that we’ve been able to help you fix the iPad won’t turn on problem.
iPad Won’t Turn On? Here’s What To Do
I’m also going to take a look at the infamous “black screen of death”, and cover what users can do if this is occurring. If you’re having issues with your iPad Pro not turning on, it may be an easy fix, or you may find yourself in need of contacting Apple Support, depending on the severity of the situation. According to reports on the internet, users can have an issue where their iPad Pro mysteriously turns off for no reason. If your iPad Pro is frozen or you are experiencing a black screen, there’s a couple of different things you can try to avoid this. Of course, if you are stuck on the black screen of death, you can force your iPad Pro to restart. Next, one of the other things you are going to want to do is give your iPad Pro a charge to see if the issue is that it is running out of juice.
Virtually every Apple device will power-on automatically once it receives enough power, so it’s rather easy to rule out this issue. Of course, you may not actually be experiencing the black screen of death, rather, you may simply be dealing with an iPad that has its brightness setting turned all the way down. If you’re using an older version of iPadOS, access the Control Center by dragging up from the bottom of your screen. If you are still having issues with the black screen of death, you can update iPadOS to the newest version available for your device. Note that since this may require entering the password on your iPad, this isn’t going to work if you are completely unable to see your screen. If this the issue, then placing your iPad Pro into Recovery Mode and then updating it or restoring it may do the trick, though, as mentioned, you’re going to have to do a bit of guesswork, as you won’t be able to see certain prompts on your screen.
First, connect your iPad to either a Mac or PC and then open iTunes or a Finder window. DFU mode lets an iPad Pro experiencing problems to still have communication with iTunes or Finder. Time needed: 5 minutes If your iPad Pro has Face ID, hollow these steps. Press and hold the Power button for three seconds, or until the screen turns black. If you see the icon stating to plug the device into a machine, you’ve held it down too long. If you have a black but illuminated screen, your iPad Pro is successfully in DFU mode.
If your iPad Pro has a Home button, follow these steps to enter DFU mode. Turn off your iPad by holding the power button for three seconds and sliding the Shut Down slier to the right.
If the iPad keeps a black screen that is illuminated, you’ve successfully entered DFU mode.
It’s worth reiterating that these steps will obviously be hard to follow if your screen is completely black. However, it’s at least worth trying, for if your iPad Pro is still not turning on, you’re going to need to contact Apple Support. However, if you find that your iPad screen isn’t turning on at all, you can either try these steps blind, or you will need to contact Apple Support.
While having an iPad Pro that is not turning on is obviously no good, there are some steps you can take to try and remedy it. Considering the investment an iPad Pro can be for many people, users are obviously going to want an experience that works well for them.
iPad Won’t Turn on? 6 Techniques to Fix [SOLVED]
Holding an iPad to read a webpage, watch movies or play a game can be productive or fun. If your iPad won’t turn on, some users may think that it’s a black screen of death problem.
In fact, a faulty charger, drained battery, broken screen, damaged internal hardware, and software issues can lead to inability to power it on. Once you’ve identified the root cause of an unresponsive iPad, it will be easier to find a solution.
If the charger does not cater to the function with your iPad, it will affect battery performance, damage the device and void the phone’s warranty. The third-party cables don’t carry MFI (Made for iPad) certifications.
The principle can be applied in the situation where iPad or iPhone won’t charge. You drop the iPad only to find that it won’t turn on or stops working.
If iPad is on but the screen or display is not working as it should, startup issue can be easily fixed by taking to a professional for repair or replace.
In case nothing seems to be working and the iPad is unresponsive, the damage lies in the internal hardware that you can’t see, such as the motherboard. Water damage is often irreversible, and no one guarantee that it will be restored to full functionality unless you act quickly. Software crash is almost hard to identify, but it will not hurt the device badly and with a little effort involved you get an unresponsive iPad back up and running.
Provided it still won’t turn back on, try hard reset trick (scroll down to the next solution.) A tip of prevention of charging issue: When the battery power is low, say it runs down to 2% to 4% battery life, don’t let it drain completely, rather plug in the power charger to make sure it gets enough charge back. A hard reset or a forced restart is often the most effective solution to resolve common software issues without affecting any data on the device. iPad models with Face ID: Press and quickly release the volume up button.
As effective as hard reset is, it sometimes doesn’t work no matter how many times you’ve attempted in particular your iPad gets stuck on a black screen after a software update. It’s incredibly simply, but it’s effective: fire up the system-repair software, launch the repair mode available, and leave it to do get your iPad back up and running.
Note that the comprehensive Advanced Mode will definitely fix the system errors whist erasing your data on iPad. The step-by-step instruction on the graphical interface helps even a complete novice master the troubleshooting process with little effort.
Once you’ve completed the installation of the software, run it, click “More tools” on the bottom left of the window, then choose “iOS System Recovery”.
Effective and powerful, the software can fix a wide range of issues regarding to iOS firmware like iOS device won’t turn on, is stuck on black screen, is not responding, is frozen, is stuck on Apple logo screen, recovery mode, DFU mode, as well as iTunes errors. To perform the task, connect your unresponsive iPad to the computer and click Start button. In the case that the device still doesn’t respond, go back to Step 2 and try using Advanced Mode.
It just lets you to reinstall iOS and get iPad back to life even if it doesn’t turn on or is frozen at a black screen. You need to apply the buttons trick to enter Recovery Mode, as we outlined above for a force restart.
In iTunes, locate the iPad icon on the top left corner of the window. iPad models with Face ID: Press and quickly release the volume up button.
When iPad starts to restart, continue holding the top button until it goes into recovery mode. When iPad starts to restart, continue holding the top button until it goes into recovery mode.
Step 5: When the iPad is in the recovery mode, you will get a prompt from Finder or iTunes with the Restore and Update options. The process will take around 15 minutes, and after that, your iPad will exit recovery mode and you’ll need follow the above steps one more time. It’s strongly advised that you shouldn’t repair the dead battery, broken screen, damaged motherboard or other internal parts yourself.
Be First to Comment