If the battery was completely drained the iPad may not respond for up to an hour. If the iPad still does not charge make an appointment at an Apple Store to have your device examined by a technician.
3 Main Reasons Your iPad Won’t Turn On (With Solutions)
We’ve looked at the common reasons an iPad tablet won’t switch on based on our experience. If your device is not turning on or charging, the issue could be the charger, software corruption or physical damage. If you have been charging the device successfully up until now the problem could be an accumulation of dirt and dust on the lightning port.
Though not common, this problem can happen if you use the phone in dusty areas or your carry bag or cover has loose fibres or dirt.
Apple users sometimes report software crash issues which makes the iPad inaccessible when restarted. Hold the iPad’s home button while still connected to the computer and continue for some seconds until iTunes automatically recognises your device. Slowly release the home button when iTunes displays a message that an iPad was detected in recovery mode. The size of an iPad is an advantage to the users but it makes the device more susceptible to physical damage if it is dropped or bumped. Check whether buttons are functioning correctly and whether the charging port is damaged or has got dust or dirt in it, as noted earlier. If any of these conditions exist then you will need further action or, in the worst cases, seek help from us with an iPad replacement screen, charging port swap or another repair. If none of the above solutions work or there is evidence of major physical damage then it is time for a professional repair. You can contact our technician team for advice or opt for our send-in repair service.
If none of the issues above applies then it may be that your device is charging ok (you have power) but won’t turn on or boot up. The reasons why your charged iPad won’t turn on could be a software issue or physical damage. You can perform a hard reset by simultaneously pressing the power and home button until you see Apple’s logo in the centre of the screen.
All being well the tablet will turn on shortly after, proving that a software problem was causing the startup issue.
The only option left if restoring the device does not work is to contact a professional repairer like us in order to move forward. If you work through the abridged series of options and steps carefully and in order, you will solve many issues that can cause an iPad to not switch on.
What to Do When Your iPad Won’t Turn On
The solutions to fix an iPad that’s not waking up from sleep can be simple or complicated.
My iPad Won’t Turn On! Here’s The Real Fix.
In this article, I’ll explain why your iPad won’t turn on and show you how to fix the problem for good! First, we’ll help you troubleshoot for a software crash, then show you how to determine whether or not your iPad needs to be repaired! This can make it appear like your iPad isn’t turning on, when in fact it was really on the entire time! If your iPad turned on after you performed the hard reset, you’ve identified that a software crash was causing the problem.
A hard reset is almost always a temporary solution to a software crash because you haven’t actually fixed what caused the problem in the first place. After backing up your iPad, skip down to the Advanced Software Troubleshooting Steps section of this article.
I’ll show you how to address a deeper software problem by Resetting All Settings or putting your iPad in DFU mode, if necessary. If you have a Mac running macOS Catalina 10.15 or newer, you’ll back up your iPad using Finder. If you have a PC or a Mac running macOS Mojave 10.14 or older, you’ll use iTunes to back up your iPad. Sometimes iPad’s won’t charge and turn back on depending on the charger you plug it into. There have been documented examples of iPads charging when plugged into a computer, but not a wall charger. If your iPad died and isn’t turning back on, it’s possible that there’s a problem with your charging cable.
In the event that your iPad has a major hardware problem, you don’t want to run the risk of losing all of your important information. If your iPad is being recognized by iTunes or Finder, try performing another hard reset while its plugged into the computer. If the second hard reset doesn’t work, move onto the next step where I’ll discuss your repair options. If these steps don’t fix the problem with your iPad, I’ll help you find a reliable repair option.
This is the deepest type of restore you can do on an iPad, and it’s the last step you can take to completely rule out a software problem. Check out our video tutorial if you need help putting your iPad in DFU mode. Note: If the Apple logo appears on your iPad display after Step 4, you’ve held the buttons for too long and will start again. If you recently dropped your iPad, or if it has been exposed to liquid, it probably isn’t turning on because of a hardware issue.
You can take your iPad into your local Apple Store, just make sure to schedule a Genius Bar appointment first. We know it’s frustrating when your iPad won’t turn on, so I hope you’ll share this article on social media with your family and friends if they experience the problem too.
‘Why is my iPad screen black?’: 3 ways to troubleshoot your iPad if the screen is unresponsive
If your iPad screen is black and unresponsive, it may simply mean the device is turned off or has a dead battery. And in the event of a software crash causing an iPad black screen, a quick forced reset will usually do the trick.
3 Main Reasons Your iPad Won’t Turn On (With Solutions)
We’ve looked at the common reasons an iPad tablet won’t switch on based on our experience. If your device is not turning on or charging, the issue could be the charger, software corruption or physical damage.
If you have been charging the device successfully up until now the problem could be an accumulation of dirt and dust on the lightning port.
Though not common, this problem can happen if you use the phone in dusty areas or your carry bag or cover has loose fibres or dirt. Apple users sometimes report software crash issues which makes the iPad inaccessible when restarted. Hold the iPad’s home button while still connected to the computer and continue for some seconds until iTunes automatically recognises your device.
Slowly release the home button when iTunes displays a message that an iPad was detected in recovery mode. The size of an iPad is an advantage to the users but it makes the device more susceptible to physical damage if it is dropped or bumped. Check whether buttons are functioning correctly and whether the charging port is damaged or has got dust or dirt in it, as noted earlier. If any of these conditions exist then you will need further action or, in the worst cases, seek help from us with an iPad replacement screen, charging port swap or another repair.
If none of the above solutions work or there is evidence of major physical damage then it is time for a professional repair. You can contact our technician team for advice or opt for our send-in repair service.
If none of the issues above applies then it may be that your device is charging ok (you have power) but won’t turn on or boot up. The reasons why your charged iPad won’t turn on could be a software issue or physical damage.
You can perform a hard reset by simultaneously pressing the power and home button until you see Apple’s logo in the centre of the screen. All being well the tablet will turn on shortly after, proving that a software problem was causing the startup issue.
The only option left if restoring the device does not work is to contact a professional repairer like us in order to move forward. If you work through the abridged series of options and steps carefully and in order, you will solve many issues that can cause an iPad to not switch on.
9 Ways to Fix When iPad Won’t Turn On (In 5 Minutes)
Well, you haven’t tried everything just yet and there a couple of ways that can bring your iPad back from the dead. In this guide, I’ll show you how to fix your iPad when it doesn’t turn on in just under 3 minutes of your time. The very first thing you should do is to make sure your iPad’s battery is charged enough to run the tablet.
So go ahead, grab your iPad and plug it in to charge like you usually would.
Step 1: Press and hold down your Power button (at the top) to turn on your iPad. If your cable doesn’t work with their iPhone or iPad, then you’ve already found the problem!
If that is the case, then what you can do is to charge your iPad by connecting it to a USB port on your laptop computer. (If you’ve already tried this initially then this time try charging your iPad using the wall charger.)
A software crash is a pretty common problem that happens to a lot of Apple users.
Just think of it as how you usually restart your iPad, but with this, it clears more of your device’s unwanted garbage memory. Grab your iPad and try plugging it into your computer and then open iTunes. Sometimes we might not even realise after we’ve dropped or spilt something on our iPad that it has caused a certain degree of damage.
Now if the damage is minor, Apple may ignore it and will probably replace your iPad if it’s under warranty. If you find your iPad is in excellent condition, but it’s still not turning on, then there’s always one final solution that should fix it.
You can learn more about DFU below (I’ve linked to a full in-depth guide that will answer all your questions) 🙂 Step 2: Now this is important, press and hold down your Power button (on the top of your iPad) for 3 seconds. All you have to do now since iTunes successfully detects your device is follow the onscreen on instructions (it’s just a few quick, simple steps). If you find that getting your iPad into DFU mode is not working for you, then you can always get some help.
If your iPad still won’t turn on, then it’s time pay a little visit with the Genius Bar at your nearest Apple Store or Apple Authorised Service Provider. Share this monster guide with anyone, your friends, your family and help them if their iPad won’t turn on.
My iPad Won’t Turn On! Here’s The Real Fix.
In this article, I’ll explain why your iPad won’t turn on and show you how to fix the problem for good! First, we’ll help you troubleshoot for a software crash, then show you how to determine whether or not your iPad needs to be repaired! This can make it appear like your iPad isn’t turning on, when in fact it was really on the entire time! If your iPad turned on after you performed the hard reset, you’ve identified that a software crash was causing the problem. A hard reset is almost always a temporary solution to a software crash because you haven’t actually fixed what caused the problem in the first place. After backing up your iPad, skip down to the Advanced Software Troubleshooting Steps section of this article. I’ll show you how to address a deeper software problem by Resetting All Settings or putting your iPad in DFU mode, if necessary. If you have a Mac running macOS Catalina 10.15 or newer, you’ll back up your iPad using Finder.
If you have a PC or a Mac running macOS Mojave 10.14 or older, you’ll use iTunes to back up your iPad. Sometimes iPad’s won’t charge and turn back on depending on the charger you plug it into. There have been documented examples of iPads charging when plugged into a computer, but not a wall charger. If your iPad died and isn’t turning back on, it’s possible that there’s a problem with your charging cable.
In the event that your iPad has a major hardware problem, you don’t want to run the risk of losing all of your important information. If your iPad is being recognized by iTunes or Finder, try performing another hard reset while its plugged into the computer. If the second hard reset doesn’t work, move onto the next step where I’ll discuss your repair options. If these steps don’t fix the problem with your iPad, I’ll help you find a reliable repair option. This is the deepest type of restore you can do on an iPad, and it’s the last step you can take to completely rule out a software problem. Check out our video tutorial if you need help putting your iPad in DFU mode.
Note: If the Apple logo appears on your iPad display after Step 4, you’ve held the buttons for too long and will start again. If you recently dropped your iPad, or if it has been exposed to liquid, it probably isn’t turning on because of a hardware issue.
You can take your iPad into your local Apple Store, just make sure to schedule a Genius Bar appointment first. We know it’s frustrating when your iPad won’t turn on, so I hope you’ll share this article on social media with your family and friends if they experience the problem too.
What to Do When Your iPad Won’t Turn On
The solutions to fix an iPad that’s not waking up from sleep can be simple or complicated.
My iPad will not turn on: How to fix a dead device
Remember, keep holding both those buttons until that Apple logo shows up on the screen. On an iPhone 6S or below plus all iPads & iPod Touches, press Home and Power at the same time until you see the Apple logo
Finally, press and hold the Side button until you see the Apple logo Once you see the Apple logo, it remains there for a few seconds, and then your iPad should return to normal again.
If it doesn’t show anything except a black screen, then most likely your tablet just ran out of battery. Also, some readers report success when charging their iPads (or another iDevice) for a full two days!
Make sure that your charger and cable is Apple Certified (MFI) and working effectively. If unsure, visit the Apple Product page for your specific model of iPhone,iPad, or another iDevice.
And rest assured, even if you accidentally charge your iDevice with the incorrect charger–it won’t destroy your device or brick it. While Apple doesn’t include on the iPad the same robust battery health information it includes for iPhone, checking your iPad’s battery health does give you a quick snapshot of overall performance. Armed with that information, you can identify patterns and trends of decreasing battery performance. If “Hey Siri” isn’t enabled on your iDevice, connect to power and press and hold the Home button for 30 seconds to activate Siri or press the side button for iPhone X+.
Fixing this isn’t difficult but does involve taking the iDevice apart to access that display connector. If you are a Do-It-Yourselfer, google this particular problem (screen or LCD connector) to find step-by-step instructions and videos. If your iPad shows up in iTunes or Finder normally without any messages or warnings, that means your device is working, and the most likely culprit is your screen or the display connecting cable.
If iTunes/Finder shows a message or warning when you connect your device, follow the on-screen instructions to Update or Restore your iPad. Restoring your iPad from iTunes or Finder may lead to data loss. Getting your iPad into DFU mode is a little challenging, requiring patience and practice.
Timing is essential when placing iDevices into DFU mode so carefully follow the instructions. There could be a driver problem that prevents your computer from recognizing your iOS device. Reach out to that special friend of yours and check your iPad or iDevice out on his or her’s computer. The best way to confirm this is to check with Apple so that they can run a Battery Service on your iPad. Please make sure to try all the above steps before you decide to contact Apple and spend extra. If your iPad starts to boot but then flashes to a black screen over and over again, it’s locked into a Reboot Loop.
Usually, iPads don’t ATTEMPT to restart until there is enough battery power. But for the unlucky few, something is telling the iPad to try to boot even though the battery can’t last long enough to finish the process. We need to get your iPad sufficiently charged to complete a normal and full boot cycle If you don’t hold Home and Power long enough for a sufficient charge, that loop pattern continues. So try and hold down these buttons for as long as possible–or create some makeshift tools to assist–just keep these gentle, so they don’t cause other damage One reader found success toggling the side button (mute/vibrate) back and forth a few times. You guessed it correctly; it’s time that you give Apple a call or go to a retail store nearby. If you are under warranty with Apple, give them a call or set-up an in-store appointment so for diagnostic services.
iPad won’t turn on? 5 recommended resolutions from the iSmash experts
There are two possible outcomes of dropping your iPad; either the screen is brokenor the motherboard is damaged. You can personally test for the first scenario, by using theto see if your iPad is on, but the screen is not working. So if you’re having issues turning your iPad on, have a think about whether it has had any contact with liquid, because even a small drop can damage the internal hardware. Unfortunately if your device is water damaged, it won’t be covered by the 1-year Apple warranty.
Be First to Comment