If your iPad has a frozen screen, doesn’t respond when you touch it, or becomes stuck when you turn it on, learn what to do. If your iPad doesn’t turn on, follow these steps to check your hardware and charge your device.
If your iPad doesn’t turn on, follow these steps to check your hardware and charge your device. If you see the Apple logo or a red or blue screen during startup, try these steps: On a Mac with macOS Mojave or earlier, or on a PC, open iTunes. If it takes more than 15 minutes, your iPad will exit recovery mode, and you’ll need to repeat steps 2-4.
8 ways to fix it. What are these ways?
The eight solutions are based on three unique situations that users will likely encounter when tackling the iPad black screen issue. This article also has a step-by-step guide so users can practically implement the solutions on their iPads.
Using proper preventive techniques like regular iPadOS updates, installing applications from the Apple store only, and using the original Apple charger and lightning cable can reduce the chances of getting a black screen on your iPad. Collectively, all the iPhones and iPads in the Apple lineup are prone to this issue.
Since this issue is quite common, users in the Apple community have developed many troubleshoots that can help fix an iPad screen blackout. Luckily, the iPad’s black screen of death is fixable most of the time, so don’t panic just yet.
Older iPads are more likely to experience the black screen of death than new out-of-the-box devices. If this doesn’t work a full hard reset and restoring the iPad may be needed. Damaged components will cause black screen on iPad and again it’s best to seek advice from a professional repairer.
If you have not already checked ensure the iPad isn’t just flat and the charger is failing to charge the battery up.
If your iPad screen suddenly goes black, and you cannot see images or hear any notifications, try the following fixes. When charging, make sure you are using the original Apple-supplied charger and lightning cable.
Every iPad charging port is susceptible to damage because it receives the most wear and tear as it is constantly being used every day. For an older iPad with a home button with Touch ID, the process is as follows, Once the Apple logo has appeared, release the buttons and wait for the iPad to reboot. Press and hold the power button until you see the Apple logo on the screen.
Any apps that are malfunctioning should be uninstalled to avoid it causing problems like a black screen. If your iPad screen is black, but it’s still making noise, the good thing is it’s not completely dead.
A minor reason that can cause this is accidentally turning the screen brightness down all the way. If you can hear the notifications and alerts on your iPad, but the screen stays black, try the following fixes.
The readings from the ambient light sensor will be skewed if it is not working properly. As a result, the auto brightness feature can cause the screen to turn black because the data provided by the ambient light sensor is not correct. To fix this issue, simply disable the auto brightness option on your iPad. The iPad will also not show the display if the screen ribbon cable is damaged or disconnected.
The screen ribbon cable connects the display to the logic board of the iPad. This fragile cable gets damaged when the iPad is dropped on the floor or if it hits a hard object. Keeping the auto brightness off will stop the light sensor from turning the screen off in the future. Then, press and hold the power button until the device boots to the recovery screen.
Updating the iPadOS does not erase any existing data or user files present in the device. Still though, you should always periodically backup your data on iCloud or other similar cloud-based storage solutions.
The next solution we are going to talk about is to erase all data present on the physical storage drive of the iPad. It has a good chance of solving the iPad black screen, granted the issue is due to unstable or corrupt firmware.
To prevent this issue, try putting a cover on your device to avoid damage to the iPad’s screen. Keeping the iPad up to date will ensure all the programs and system will run smoothly. If you have tried resetting the iPad black screen using all of the above-listed methods and nothing seems to work, then perhaps the issue is too complex and deep-rooted. If the iPad still isn’t working after you hard reset it, try plugging it into the computer and see if you can use it from there.
If you don’t know how to do this, seek advice from Apple, as messing around with the screen can cause more problems to occur. Unfortunately, sometimes there are faults that occur within the iPad’s components that are out of our control, and there is no way to prevent them.
Go to restore so it can begin to start reinstalling the operating processors and the firmware. For a problem with the components, it’s best to get Apple to check over the iPad and advise what the next steps will be.
Keep the iPad covered to protect it from moisture, dust, and drops. If the iPad is updated, it will help avoid problems like firmware corruption.
There are a few things that can cause your iPad to have the Apple logo appear on the screen then turn off. If you downloaded malware, most likely from opening a link in your email or chat, then it can cause the phone to malfunction. In some cases, it can fix the problem of the Apple logo appearing on the screen and then disappearing especially if it is a minor glitch or malware that isn’t too complex.
Try another charger and let the iPad charge for 30 minutes to see if that fixes the problem. Replacing the charger every 12 months is a good idea to keep them functioning at their best. Try not to open any links that are not from reputable companies in case they are forms of malware that can wreak havoc on your iPad.
In the latest iOS version, there is a feature for the display that is called grayscale mode. You may have accidentally turned grayscale mode on without realizing not to worry, it is easily fixed.
Unfortunately, you find that when you unplug it from the charger in a short period of time, the screen will go black. To fix this problem, you will need to send the phone to Apple and have a new battery installed.
While it is easy to put your phone on charge overnight, it is a bad habit that will degrade your battery fast. First, try replacing your charger and letting the iPad charge for 30 minutes,, and try to turn the phone on. You can try performing a soft reset, but if the battery is the problem, it will need to be replaced by an Apple repairer. Avoid charging your device in bits and pieces for 30 minutes here and then 2 hours there. Jailbreaking phones and iPads is not a good idea and can corrupt the device beyond repair.
In some cases, it can happen immediately; in others, it can take a day or two for the screen to die. Avoid jailbreaking your device as it only causes problems for the system and will drastically reduce the iPad’s life. As soon as you sense an app is taking longer to load or seems to freeze, uninstall it immediately to avoid causing problems with the iPad.
If you update the phone and the battery dies before it can finish installing, it can cause a black screen. Try charging the iPad for 30 minutes with a different cable and charger, preferably an Apple-branded one. Try conducting a soft reset of the iPad in case there is a glitch, and the system is stuck. Press and then hold the sleep button and the volume down key for a few seconds
Always try to keep a heavy-duty cover on the device and a screen protector to protect it from drops and bumps. A hardware problem such as a loose cord, cracked screen, and motherboard damage.
If those solutions don’t work, it may be a hardware problem, and you will need Apple to repair the device. If the restart doesn’t work the iPad will need to be sent off to Apple for repair.
It is not a job that inexperienced people should be doing due to the small parts that you can cause more damage to if you don’t know what you are doing. Dropping or mishandling the iPad is usually the cause of this unless it was a faulty machine from the start. Ensure you have a hard cover on the iPad and carry it around in a bag to protect it should you drop it. Changing the screen on an iPad is a costly repair and will set you back quite a lot of money.
*Data in the given table is based on Simply Fixable’s market research and the official Apple website To prevent the iPad screen from going black again, make sure you are following the right protocols: Update the iPadOS regularly, don’t install applications from third-party sources, and use the original Apple charger and lightning cable. Doing this may not fully eliminate the risk of getting the iPad black screen of death, but the chances will be reduced significantly. Hollie is a technical writer with over 15 years of experience specializing in creating content to help keep the rest of the world informed and updated on all tech-related subjects. Hollie has created content for many writing platforms in the tech and IT industry, and her passion for turning words into helpful articles is still growing. When she isn’t creating content for the web, she is enjoying a crazy life with her family and friends.
iFixit Troubleshooting
That said, liquid damage is among the more challenging DIY repairs to undertake, so if you feel unsure or need access to important data on your phone, you may want to consult with a professional before breaking out your tools. In addition to isopropyl alcohol, you will need a container big enough to submerge your iPhone’s logic board.
‘Why is my iPad screen black?’: 3 ways to troubleshoot your iPad if the screen is unresponsive
If your iPad screen is black and unresponsive, it may simply mean the device is turned off or has a dead battery. A black iPad screen may also indicate a software crash, which can usually be fixed by forcing it to restart. And in the event of a software crash causing an iPad black screen, a quick forced reset will usually do the trick.
iPad Won’t Turn On? Here’s What To Do
I’m also going to take a look at the infamous “black screen of death”, and cover what users can do if this is occurring. If you’re having issues with your iPad Pro not turning on, it may be an easy fix, or you may find yourself in need of contacting Apple Support, depending on the severity of the situation. According to reports on the internet, users can have an issue where their iPad Pro mysteriously turns off for no reason. If your iPad Pro is frozen or you are experiencing a black screen, there’s a couple of different things you can try to avoid this.
Of course, if you are stuck on the black screen of death, you can force your iPad Pro to restart. Next, one of the other things you are going to want to do is give your iPad Pro a charge to see if the issue is that it is running out of juice.
Virtually every Apple device will power-on automatically once it receives enough power, so it’s rather easy to rule out this issue. Of course, you may not actually be experiencing the black screen of death, rather, you may simply be dealing with an iPad that has its brightness setting turned all the way down. If you’re using an older version of iPadOS, access the Control Center by dragging up from the bottom of your screen. If you are still having issues with the black screen of death, you can update iPadOS to the newest version available for your device.
Note that since this may require entering the password on your iPad, this isn’t going to work if you are completely unable to see your screen. If this the issue, then placing your iPad Pro into Recovery Mode and then updating it or restoring it may do the trick, though, as mentioned, you’re going to have to do a bit of guesswork, as you won’t be able to see certain prompts on your screen.
First, connect your iPad to either a Mac or PC and then open iTunes or a Finder window. DFU mode lets an iPad Pro experiencing problems to still have communication with iTunes or Finder. Time needed: 5 minutes If your iPad Pro has Face ID, hollow these steps.
Press and hold the Power button for three seconds, or until the screen turns black.
If you see the icon stating to plug the device into a machine, you’ve held it down too long. If you have a black but illuminated screen, your iPad Pro is successfully in DFU mode.
If your iPad Pro has a Home button, follow these steps to enter DFU mode. Turn off your iPad by holding the power button for three seconds and sliding the Shut Down slier to the right. If the iPad keeps a black screen that is illuminated, you’ve successfully entered DFU mode. It’s worth reiterating that these steps will obviously be hard to follow if your screen is completely black.
However, it’s at least worth trying, for if your iPad Pro is still not turning on, you’re going to need to contact Apple Support. However, if you find that your iPad screen isn’t turning on at all, you can either try these steps blind, or you will need to contact Apple Support.
While having an iPad Pro that is not turning on is obviously no good, there are some steps you can take to try and remedy it. Considering the investment an iPad Pro can be for many people, users are obviously going to want an experience that works well for them.
Why is My iPad Screen Black and Won’t Turn on? 10 Troubleshooting Tips!
The occurrence of an iPad screen blackout is a common symptom that can stem from a multitude of hardware or software-related issues. The iPad won’t turn on can be attributed to various factors such as corrupted firmware, applications that are not responding, a charger or battery that is not functioning properly, damaged cables, or a faulty display. The age of the iPad plays a significant role in worsening its problems, primarily due to the wear and tear of its hardware and electrical components over time. By diligently keeping up with iPadOS updates, exclusively downloading apps from the Apple store, and utilizing the authentic Apple charger and lightning cable, you can significantly diminish the likelihood of encountering the frustrating issue of a black screen on your iPad.
Numerous underlying factors can trigger the occurrence of the black screen of death on an iPad. There are a couple of solutions that can be tried when experiencing a black iPad screen but still being able to hear sounds.
If your iPad is on but the screen is black and attempting a hard reset does not resolve the problem, it is recommended to seek guidance and advice from Apple. If you are experiencing an issue where your iPad is not turning on and is stuck on the Apple logo, one possible way to resolve this problem is by putting your device into recovery mode. If you are experiencing an iPad screen black but still on without the appearance of the Apple logo, you can put your device into recovery mode as well. This mode allows you to troubleshoot and potentially fix any software-related problems that may be causing the black screen.
By following the above-mentioned steps to enter recovery mode, you can attempt to restore your iPad to its normal functioning state. If you are experiencing an issue with your iPad where the screen is completely black and there is a spinning wheel, the first solution is to force restart your device.
If this doesn’t work, you can try putting your iPad into recovery mode by connecting your device to a computer and using iTunes to restore it to its factory settings. If your iPad is fully charged but the screen remains black, one possible explanation is a faulty battery, which may need to be replaced or repaired. If you accidentally dropped your iPad and it refuses to turn on, it may be due to a damaged screen. By replacing the screen, you can restore the functionality of your iPad and ensure that it turns on properly again.
One of the common reasons why an iPad may only turn on when it is plugged in or charging is due to a defective battery. In order to avoid the occurrence of the iPad screen turning black, it is imperative to adhere to the appropriate procedures. While there is no guarantee that these actions will completely eradicate the possibility of encountering the dreaded black screen of death on your iPad, they will undeniably diminish the likelihood.
iPad 3rd gen won’t turn on just black screen
After that, I turned on my iPad but after the apple logo appears, the screen goes black. I already connected my iPad to iTunes to the PC to recover and restore it but still it won’t turn on; it just keeps showing the Apple logo then black screen again.
Be First to Comment