Despite being a fantastic device with numerous features, is not immune to the occasional issues. In this blog post, we will talk about the different reasons why your iPad won’t turn on like battery drainage or faulty charging cable or adapter.
The iPad is experiencing a software crash or glitch causing it to be unresponsive.
Any of the hardware components are not working properly like a faulty power button or damaged battery.
Plug your iPad into a new power outlet with a new charging cable and adaptor. If your iPad Pro isn’t turning on, it could be due to a variety of issues but don’t you worry, as it can be fixed by following a few simple steps. Occasional bugs or glitches in the operating system might stop iPad Pro from turning on. Damages such as drops, impacts, or exposure to water can prevent iPad Pro from turning on. Inspect the device for any visible damages and ensure that the ports are clean and free of debris.
Connect the iPad to a computer and use iTunes or Finder to restore or update the device.
Keep the device updated to the latest software version to prevent bugs and glitches. Use a protective case and screen protector to avoid any physical damages.
Do not expose the iPad Pro to extremely hot or cold temperatures to prevent battery and hardware damages. Occasionally clean the device’s ports and screen and perform a restart to keep it running smoothly. If your iPad Pro 12.9 inch won’t turn on, try following the above troubleshooting steps. Chances are your iPad will have a similar problem no matter what version or model you are using.
So, follow the troubleshooting solutions and if the problem persists seek professional help. The iPad Air will power on once it detects the current flowing through its circuits.
Make sure to charge your iPad on time and before its battery completely runs out. When an iPad mini drops, it either breaks the screen or damages the motherboard.
If your iPad mini won’t turn on, there is a high chance its battery is depleted.
Clean the charging port with a soft fabric and also try drying your iPad mini if you suspect there is a water damage.
There is a chance your iPad battery is completely depleted and you will have to wait a little while to check If it charges or not. Some kinds of software crashes make the iPad completely unresponsive and unable to charge as well.
There could be a bent connector or fried cable that is preventing your iPad form charging. If your iPad Pro won’t turn on even when plugged in, you should follow the same instruction given above. But, if the problem isn’t being solved through the above steps then contact Apple support immediately. Follow all the troubleshooting steps given above and make sure you are using charging equipment from a certified store. Perform a hard reset by holding the power and volume buttons together until the Apple logo appears. If the issue persists, it’s better to contact the Apple store or any reliable third party service like Simply Fixable. Do not expose the iPad to extreme temperatures, as it can affect the battery and other components. Use a sturdy case and a screen protector to prevent hardware damage.
If it doesn’t work then try charging it for 15 to 30 mins to rule out the possibility of battery depletion. If both these solutions don’t work then seek professional assistance as it might be a hardware malfunction. If your iPad screen is frozen on the Apple logo and doesn’t progress further from that then that indicates a software problem. Number one reason could be that the battery is down causing it stuck on the Apple logo.
An OS update may have gone wrong on installation, which can harm the boot process. Make sure you finish all the software’s updates and let the system reboot completely.
Restore your iPad from iTunes to prevent any sort of data loss. If your iPad is not turning on after a hard reset then the problem is serious and could be a Hardware malfunction.
Any type of physical stress can damage the iPads internal components and prevent it from turning on even after hard reset. It can be a perplexing issue when your iPad shuts down abruptly and won’t turn on. There is a possibility that your iPad’s battery was so critically low that it shut down abruptly in order to protect itself. There was an unexpected software glitch or crash that caused your iPad to shut down and won’t turn on.
There can be some underlying hardware issues that caused your iPad to malfunction and shut down abruptly.
Don’t use your iPad in extreme heat or subject it to physical stress. However, if we take the proper precautionary measures, we can prevent the issues from occurring in the first place. If you follow these preventative measures, you can reduce the risk of power-related and software problems significantly and enjoy a stress-free experience with your iPad.
*Data in the given table is based on Simply Fixable’s market research and the official Apple website However, if you have the right troubleshooting skills, you can figure out the potential cause and fix it and get your iPad back running. Madi is a dynamic tech writer with a passion for simplifying complex concepts.
Her expertise lies in creating clear and concise guides, blogs, manuals, and tutorials that empower users to navigate the technological landscape with ease.
Throughout her career, Madi has worked with numerous leading tech companies, collaborating with engineers, developers, designers and marketers to create user manuals, FAQs, troubleshooting guides, and tech articles, on the websites such as “Technology Castle” and “Bilzimo”. She can transform intricate technical jargon into user-friendly language, empowering users to understand and utilize products effectively.
8 ways to fix it. What are these ways?
The eight solutions are based on three unique situations that users will likely encounter when tackling the iPad black screen issue. This article also has a step-by-step guide so users can practically implement the solutions on their iPads. Using proper preventive techniques like regular iPadOS updates, installing applications from the Apple store only, and using the original Apple charger and lightning cable can reduce the chances of getting a black screen on your iPad. Collectively, all the iPhones and iPads in the Apple lineup are prone to this issue.
Since this issue is quite common, users in the Apple community have developed many troubleshoots that can help fix an iPad screen blackout. Luckily, the iPad’s black screen of death is fixable most of the time, so don’t panic just yet.
Older iPads are more likely to experience the black screen of death than new out-of-the-box devices. If this doesn’t work a full hard reset and restoring the iPad may be needed.
Damaged components will cause black screen on iPad and again it’s best to seek advice from a professional repairer.
If you have not already checked ensure the iPad isn’t just flat and the charger is failing to charge the battery up.
If your iPad screen suddenly goes black, and you cannot see images or hear any notifications, try the following fixes. When charging, make sure you are using the original Apple-supplied charger and lightning cable.
Every iPad charging port is susceptible to damage because it receives the most wear and tear as it is constantly being used every day. For an older iPad with a home button with Touch ID, the process is as follows, Once the Apple logo has appeared, release the buttons and wait for the iPad to reboot.
Press and hold the power button until you see the Apple logo on the screen.
Any apps that are malfunctioning should be uninstalled to avoid it causing problems like a black screen. If your iPad screen is black, but it’s still making noise, the good thing is it’s not completely dead.
A minor reason that can cause this is accidentally turning the screen brightness down all the way. If you can hear the notifications and alerts on your iPad, but the screen stays black, try the following fixes.
The readings from the ambient light sensor will be skewed if it is not working properly.
As a result, the auto brightness feature can cause the screen to turn black because the data provided by the ambient light sensor is not correct.
To fix this issue, simply disable the auto brightness option on your iPad. The iPad will also not show the display if the screen ribbon cable is damaged or disconnected.
The screen ribbon cable connects the display to the logic board of the iPad. This fragile cable gets damaged when the iPad is dropped on the floor or if it hits a hard object. Keeping the auto brightness off will stop the light sensor from turning the screen off in the future. Then, press and hold the power button until the device boots to the recovery screen.
Updating the iPadOS does not erase any existing data or user files present in the device. Still though, you should always periodically backup your data on iCloud or other similar cloud-based storage solutions.
The next solution we are going to talk about is to erase all data present on the physical storage drive of the iPad. It has a good chance of solving the iPad black screen, granted the issue is due to unstable or corrupt firmware.
To prevent this issue, try putting a cover on your device to avoid damage to the iPad’s screen. Keeping the iPad up to date will ensure all the programs and system will run smoothly. If you have tried resetting the iPad black screen using all of the above-listed methods and nothing seems to work, then perhaps the issue is too complex and deep-rooted. If the iPad still isn’t working after you hard reset it, try plugging it into the computer and see if you can use it from there.
If you don’t know how to do this, seek advice from Apple, as messing around with the screen can cause more problems to occur. Unfortunately, sometimes there are faults that occur within the iPad’s components that are out of our control, and there is no way to prevent them. Go to restore so it can begin to start reinstalling the operating processors and the firmware. For a problem with the components, it’s best to get Apple to check over the iPad and advise what the next steps will be.
Keep the iPad covered to protect it from moisture, dust, and drops. If the iPad is updated, it will help avoid problems like firmware corruption.
There are a few things that can cause your iPad to have the Apple logo appear on the screen then turn off. If you downloaded malware, most likely from opening a link in your email or chat, then it can cause the phone to malfunction. In some cases, it can fix the problem of the Apple logo appearing on the screen and then disappearing especially if it is a minor glitch or malware that isn’t too complex.
Try another charger and let the iPad charge for 30 minutes to see if that fixes the problem.
Replacing the charger every 12 months is a good idea to keep them functioning at their best. Try not to open any links that are not from reputable companies in case they are forms of malware that can wreak havoc on your iPad.
In the latest iOS version, there is a feature for the display that is called grayscale mode. You may have accidentally turned grayscale mode on without realizing not to worry, it is easily fixed. Unfortunately, you find that when you unplug it from the charger in a short period of time, the screen will go black. To fix this problem, you will need to send the phone to Apple and have a new battery installed. While it is easy to put your phone on charge overnight, it is a bad habit that will degrade your battery fast. First, try replacing your charger and letting the iPad charge for 30 minutes,, and try to turn the phone on. You can try performing a soft reset, but if the battery is the problem, it will need to be replaced by an Apple repairer. Avoid charging your device in bits and pieces for 30 minutes here and then 2 hours there.
Jailbreaking phones and iPads is not a good idea and can corrupt the device beyond repair. In some cases, it can happen immediately; in others, it can take a day or two for the screen to die. Avoid jailbreaking your device as it only causes problems for the system and will drastically reduce the iPad’s life. As soon as you sense an app is taking longer to load or seems to freeze, uninstall it immediately to avoid causing problems with the iPad.
If you update the phone and the battery dies before it can finish installing, it can cause a black screen. Try charging the iPad for 30 minutes with a different cable and charger, preferably an Apple-branded one. Try conducting a soft reset of the iPad in case there is a glitch, and the system is stuck. Press and then hold the sleep button and the volume down key for a few seconds
Always try to keep a heavy-duty cover on the device and a screen protector to protect it from drops and bumps. A hardware problem such as a loose cord, cracked screen, and motherboard damage.
If those solutions don’t work, it may be a hardware problem, and you will need Apple to repair the device. If the restart doesn’t work the iPad will need to be sent off to Apple for repair.
It is not a job that inexperienced people should be doing due to the small parts that you can cause more damage to if you don’t know what you are doing. Dropping or mishandling the iPad is usually the cause of this unless it was a faulty machine from the start. Ensure you have a hard cover on the iPad and carry it around in a bag to protect it should you drop it. Changing the screen on an iPad is a costly repair and will set you back quite a lot of money.
*Data in the given table is based on Simply Fixable’s market research and the official Apple website To prevent the iPad screen from going black again, make sure you are following the right protocols: Update the iPadOS regularly, don’t install applications from third-party sources, and use the original Apple charger and lightning cable.
Doing this may not fully eliminate the risk of getting the iPad black screen of death, but the chances will be reduced significantly. Hollie is a technical writer with over 15 years of experience specializing in creating content to help keep the rest of the world informed and updated on all tech-related subjects.
Hollie has created content for many writing platforms in the tech and IT industry, and her passion for turning words into helpful articles is still growing. When she isn’t creating content for the web, she is enjoying a crazy life with her family and friends.
What to Do When Your iPad Won’t Turn On
The solutions to fix an iPad that’s not waking up from sleep can be simple or complicated.
3 Main Reasons Your iPad Won’t Turn On (With Solutions)
We’ve looked at the common reasons an iPad tablet won’t switch on based on our experience. If your device is not turning on or charging, the issue could be the charger, software corruption or physical damage.
If you have been charging the device successfully up until now the problem could be an accumulation of dirt and dust on the lightning port. Though not common, this problem can happen if you use the phone in dusty areas or your carry bag or cover has loose fibres or dirt. Carefully inspect the port and remove any debris/dirt with a toothpick or, preferably, a soft brush. Apple users sometimes report software crash issues which makes the iPad inaccessible when restarted.
Hold the iPad’s home button while still connected to the computer and continue for some seconds until iTunes automatically recognises your device. Slowly release the home button when iTunes displays a message that an iPad was detected in recovery mode.
The size of an iPad is an advantage to the users but it makes the device more susceptible to physical damage if it is dropped or bumped. Check whether buttons are functioning correctly and whether the charging port is damaged or has got dust or dirt in it, as noted earlier. If none of the above solutions work or there is evidence of major physical damage then it is time for a professional repair. You can contact our technician team for advice or opt for our send-in repair service.
If none of the issues above applies then it may be that your device is charging ok (you have power) but won’t turn on or boot up. The reasons why your charged iPad won’t turn on could be a software issue or physical damage. You can perform a hard reset by simultaneously pressing the power and home button until you see Apple’s logo in the centre of the screen. All being well the tablet will turn on shortly after, proving that a software problem was causing the startup issue. The only option left if restoring the device does not work is to contact a professional repairer like us in order to move forward. If you work through the abridged series of options and steps carefully and in order, you will solve many issues that can cause an iPad to not switch on.
iPad Won’t Turn on? 6 Techniques to Fix [SOLVED]
Holding an iPad to read a webpage, watch movies or play a game can be productive or fun. If your iPad won’t turn on, some users may think that it’s a black screen of death problem.
In fact, a faulty charger, drained battery, broken screen, damaged internal hardware, and software issues can lead to inability to power it on. Once you’ve identified the root cause of an unresponsive iPad, it will be easier to find a solution.
If the charger does not cater to the function with your iPad, it will affect battery performance, damage the device and void the phone’s warranty. The third-party cables don’t carry MFI (Made for iPad) certifications.
The principle can be applied in the situation where iPad or iPhone won’t charge. If iPad is on but the screen or display is not working as it should, startup issue can be easily fixed by taking to a professional for repair or replace. In case nothing seems to be working and the iPad is unresponsive, the damage lies in the internal hardware that you can’t see, such as the motherboard. Water damage is often irreversible, and no one guarantee that it will be restored to full functionality unless you act quickly. Software crash is almost hard to identify, but it will not hurt the device badly and with a little effort involved you get an unresponsive iPad back up and running. Wait 2-3 minutes, and press and hold the top button until you see the Apple logo.
Provided it still won’t turn back on, try hard reset trick (scroll down to the next solution.) A tip of prevention of charging issue: When the battery power is low, say it runs down to 2% to 4% battery life, don’t let it drain completely, rather plug in the power charger to make sure it gets enough charge back.
A hard reset or a forced restart is often the most effective solution to resolve common software issues without affecting any data on the device. iPad models with Face ID: Press and quickly release the volume up button.
As effective as hard reset is, it sometimes doesn’t work no matter how many times you’ve attempted in particular your iPad gets stuck on a black screen after a software update. It’s incredibly simply, but it’s effective: fire up the system-repair software, launch the repair mode available, and leave it to do get your iPad back up and running. Note that the comprehensive Advanced Mode will definitely fix the system errors whist erasing your data on iPad. The step-by-step instruction on the graphical interface helps even a complete novice master the troubleshooting process with little effort. Once you’ve completed the installation of the software, run it, click “More tools” on the bottom left of the window, then choose “iOS System Recovery”. Effective and powerful, the software can fix a wide range of issues regarding to iOS firmware like iOS device won’t turn on, is stuck on black screen, is not responding, is frozen, is stuck on Apple logo screen, recovery mode, DFU mode, as well as iTunes errors.
To perform the task, connect your unresponsive iPad to the computer and click Start button. In the case that the device still doesn’t respond, go back to Step 2 and try using Advanced Mode.
It just lets you to reinstall iOS and get iPad back to life even if it doesn’t turn on or is frozen at a black screen. You need to apply the buttons trick to enter Recovery Mode, as we outlined above for a force restart. In iTunes, locate the iPad icon on the top left corner of the window. iPad models with Face ID: Press and quickly release the volume up button. When iPad starts to restart, continue holding the top button until it goes into recovery mode. When iPad starts to restart, continue holding the top button until it goes into recovery mode.
Step 5: When the iPad is in the recovery mode, you will get a prompt from Finder or iTunes with the Restore and Update options. The process will take around 15 minutes, and after that, your iPad will exit recovery mode and you’ll need follow the above steps one more time. It’s strongly advised that you shouldn’t repair the dead battery, broken screen, damaged motherboard or other internal parts yourself.
My iPad Won’t Turn On! Here’s The Real Fix.
In this article, I’ll explain why your iPad won’t turn on and show you how to fix the problem for good! First, we’ll help you troubleshoot for a software crash, then show you how to determine whether or not your iPad needs to be repaired! This can make it appear like your iPad isn’t turning on, when in fact it was really on the entire time! If your iPad turned on after you performed the hard reset, you’ve identified that a software crash was causing the problem.
A hard reset is almost always a temporary solution to a software crash because you haven’t actually fixed what caused the problem in the first place. After backing up your iPad, skip down to the Advanced Software Troubleshooting Steps section of this article.
I’ll show you how to address a deeper software problem by Resetting All Settings or putting your iPad in DFU mode, if necessary. If you have a Mac running macOS Catalina 10.15 or newer, you’ll back up your iPad using Finder.
If you have a PC or a Mac running macOS Mojave 10.14 or older, you’ll use iTunes to back up your iPad.
Sometimes iPad’s won’t charge and turn back on depending on the charger you plug it into. There have been documented examples of iPads charging when plugged into a computer, but not a wall charger. If your iPad died and isn’t turning back on, it’s possible that there’s a problem with your charging cable.
In the event that your iPad has a major hardware problem, you don’t want to run the risk of losing all of your important information. If your iPad is being recognized by iTunes or Finder, try performing another hard reset while its plugged into the computer.
If the second hard reset doesn’t work, move onto the next step where I’ll discuss your repair options. If these steps don’t fix the problem with your iPad, I’ll help you find a reliable repair option. This is the deepest type of restore you can do on an iPad, and it’s the last step you can take to completely rule out a software problem. Check out our video tutorial if you need help putting your iPad in DFU mode.
Note: If the Apple logo appears on your iPad display after Step 4, you’ve held the buttons for too long and will start again. If you recently dropped your iPad, or if it has been exposed to liquid, it probably isn’t turning on because of a hardware issue. You can take your iPad into your local Apple Store, just make sure to schedule a Genius Bar appointment first. We know it’s frustrating when your iPad won’t turn on, so I hope you’ll share this article on social media with your family and friends if they experience the problem too.
SOLVED: Ipad mini won’t turn on? Tried everything? – iPad Mini
I’ve had it for six months and it was working fine twelve hours ago. I fell asleep, and when I woke up and tried to turn it on, it didn’t. Yes, I tried reinstalling itunes and it still remained unresponsive.
Be First to Comment