Whether you’re having issues with a particular charging cable, multiple cables/chargers, or intermittent trouble, follow along for 6 solutions to fix an iPad that won’t juice up normally. Below we’ll cover the most common issues that can keep your iPad from charging as designed. Make sure your iPad isn’t overheated or too cold 32º to 95º F is the ambient temperature range suited for iPad Try charging with the reverse side of the Lightning or USB-C cable that you normally use with a power adapter plugged into a wall outlet you’re certain is working Apple says you may need to leave it plugged in for 30 minutes, but you’ll normally see if it’s charging within 5-10 minutes of being plugged in If it’s still not charging, try a second cable/power adapter if you have one and/or a different outlet Check the Lightning or USB-C port for build-up or debris Use a magnifying glass or an iPhone camera if you need help seeing inside the port be careful removing it as the charging pins can be damaged – gently using a plastic dental pick can be effective
iPad Not Charging – Try These Fixes
While most users respond to this problem by heading to the nearest Apple store, some issues can be fixed without professional help. Luckily, this article will help you to identify the most common causes of your iPad charging issue and how to solve them. Charging issues can stem from a short circuit, poor quality, or something as simple as dirt stuck on the end of the charger. If the charger is in good working order and you verified its quality, it’s time to check its power requirements.
You should also ensure that the input is spike protected since an uneven power supply might cause the iPad to stop charging. Make sure to choose a USB 2.0 or higher version to guarantee a proper charge and avoid trouble.
Also, you can’t and shouldn’t use an iPhone charger to charge an iPad since the latter demands higher voltage and amperage. The risk of accumulating dust or other particles on the head of your lightning cable over time might cause a block between your iPad and charger.
Try using a non-aqueous substance like ethanol or acetone to remove the debris, then dry it, to solve the charging problem.
While packing away the charger, you should loop the charging cord in circles and place it somewhere where it is protected from external factors like humidity and heat. Cables that aren’t MFi-certified mean they don’t meet Apple’s high-quality Lightning connector requirements. The iPad not charging issue can be caused by a software glitch, which could be created by an outdated operating system or a newly installed third-party application.
The second option is to switch off your iPad and reset it by simultaneously pressing and holding the Power On/Off and Home buttons. This technique is less time-consuming and saves your valuable games, applications, data, and documents by just resetting the settings, but it still fixes the charging problem.
Moreover, a DFU restore can resolve a severe software issue and could be the cause of your iPad’s inability to charge. Remember to make a backup of your iPad since you’ll lose your images, contacts, videos, and other things if you don’t.
iPad Not Charging? Fix the Problem In 5 Valuable Steps
However, if you run into a situation with your iPad not charging, connecting with games, streaming movies and chatting with friends just isn’t possible. Not to worry, With this helpful guide, we’ll run you through what to do to bring your iPad up to speed. First up, one of the most important things you can check with an iPad not charging is the power cable. When you take your charging cable with you on business trips, it can easily get folded up, like when it’s neatly wrapped around your adapter.
If one isn’t handy, you can purchase one from a retailer, or order a 3-pack from Amazon, like this one from Essri. The Lightning Port is your connection point to power, so if there’s anything obstructing it, that could be why the iPad not charging issue is coming up.
Usually it’s hard for anything to get in there, but if you take your device with you on business trips or the outdoors, there’s a possibility that little particles of dirt, dust and lint could be inside. Disconnect any cables to free up space in the Lighting Port, then use one of the tools listed below to clean it out.
That will result in damage that only Apple will be able to repair – and it could cost you quite a bit of money!
(Lay down a handkerchief or napkin beneath the port so the lint doesn’t get on your desk or counter.)
Having an MFI certified cable and a clean Lightning port should clear up the iPad not charging situation. Per Apple Support, it’s recommended to keep your iPad in a space between -4 and 113 degrees Fahrenheit.
You don’t want to leave it in a parked car on a sunny day for too long, because there’s a good chance it’ll get hotter than that for a prolonged period of time (especially in Florida during the summer – it’s ridiculous). Also, it should go without saying that you shouldn’t try to escalate things by putting the iPad in an oven to heat up or a freezer to cool down. Once it’s there, plug in your charger and see if the battery icon in the corner changes from white to green. DFU stands for Device Firmware Update, and serves as a last resort to restore your iPad should something be wrong in the software. What you’ll want to do is plug the device into a Mac or other computer, then start iTunes or Finder. Here, you’ll be able to restore your device to an earlier firmware, to see if that resolves the iPad not charging scenario. On older iPads, the procedure to get to the DFU mode is a slight bit different. After plugging in your device to the computer, activate iTunes, and then hold the side button for three seconds. Following that, release the side button, but keep holding Home for five more seconds. These sound like complicated steps, but they could fix whatever’s in the software keeping your iPad not charging. Through Apple Support, you’ll speak to a representative that may suggest further troubleshooting, or ask questions about the cable or anything else that happened to your iPad. There might be a problem with the iPad battery, something within the software, or damage within the Lightning port that blocks any charge attempt.
With your iPad covered, you’ll be paying a minimal amount for the repair. That could make all the difference in deciding whether your device is worth fixing – or if it’s time to get something new. With the repair cost attached to your iPad not charging, it may not be worth it to get it operational again.
We accept a variety of devices for top-dollar value, including iPads, iPhones, Apple Watches, game consoles and more.
For instance, for a broken iPad 7 with 128GB storage space, we’ll give you $40. In addition, GadgetGone also provides good value for newer models in less-than-ideal shape. But whatever you do, we hope that you get the solution you need to fix that iPad not charging problem. Follow us on Instagram , Facebook , TikTok and Twitter for more helpful tech tips, future special offers and behind-the-scenes GadgetGone goodness!
“Not Charging” Message iPad
If the iPad is connected to a computer or to an iPhone charger, it may happen that Not Charging shows up. It often happens that dust and dirt end up in the socket of the iPad or iPhone.
If the cable is not officially from Apple, it can happen that after an update the iPad can no longer charge. A solution that almost always solves the problem is to connect the original iPad charger.
Are you thinking: “What are those official accessories expensive!” Look at this charger and cable in one of Belkin.
How to fix an iPad that won’t charge
Don’t worry—fixing it could be as simple as trying a new charging cable or restarting your device. Look for wear and tear, like bends or fraying, on your charging cable.
If it breaks, visit our store or make an appointment to get a quick repair by trained experts. Check the charging port on the bottom of your device and follow these steps to clean it out.
To turn it back on, press and hold the Top button until the Apple® logo appears. To turn it back on, press and hold the Top button until the Apple logo appears.
If that didn’t work, you can also try a hard reset on your iPad (also known as a force restart).
Be First to Comment