The last thing anyone wants is to find their iPad stuck on Apple logo, as it effectively makes their tablet unusable. The solutions range from simple actions you can take right now to using a third-party tool and leading up to more involving efforts such as a restoration.
Much like an iPhone or practically any other computing device on the market, the problems that can cause an iPad to fail to boot properly are fairly typical and can be generalized into a few categories. Connected to that, the iPad can also fail to boot because files in the operating system have degraded, even without any updates being applied. Those who’ve jailbroken their iPad will also see this sort of problem since the act of jailbreaking involves modifying the operating system. Though software and data is considered to be the main reason for an iPad to become disabled, it’s also plausible that an actual hardware problem could be at fault.
If it is too low on power, the iPad won’t turn on stuck on Apple logo on the screen. Hardware like tablets and smartphones need a small amount of power to actually boot up.
Leave it turned off and with a charger plugged in and providing power for a period of time, such as ten minutes or more.
If you have recently run an operating system update on your iPad, the tablet may need to reboot to install everything. While Fix 4 is Apple’s own method for restoration, you may not want to go down that route, since it will involve the loss of your personal data from your iPad. It offers over 150 system issue fixes for iOS and iPadOS, such as solving reboot loops, black screens, and the sticking Apple logo, without data loss, and it can also allow you to reset your device without using a password.
The only downside to this method, and later ones, is that you do need a Mac or PC to perform the repair, as well as a USB-to-Lightning cable. Once installed, connect your iPad to the computer, launch the tool, and click Start on the iOS system repair module. Within macOS, users instead have a similar interface within the Finder, offering the same level of synchronization and management. It is also able to be used to back up your devices, and crucially for this problem, allows you to recover a connected iPad attached using a USB-to-Lightning cable.
If your iPad is stuck on Apple logo after update and it won’t boot, this may be a good option, but not without one crucial problem. The macOS Finder and iTunes in Windows will show similar views when you connect an iPhone or iPad to it.
After downloading, installing, and launching UltFone, connect your iPad to your computer, then click Enter Recovery Mode.
If your screen isn’t working
If your screen works after removing an accessory, try using a different outlet, cable, or charger. If your screen still isn’t working, you might need to set up service for your device.
iPad stuck on the Apple logo? Here’s how to fix it
You sit down to watch a movie or read a book on your iPad®, but when you turn it on—the screen freezes. Don’t worry, at Asurion our experts help millions of customers resolve issues like this every day—on all their favorite devices—from laptops that won’t connect to Wi-Fi to unresponsive iPad screens. Here’s our step-by-step guide on how to fix an iPad that won’t turn on, so you can get back to Game of Thrones (whether it’s the book or the television series). Why your iPad is stuck on the Apple logo or won’t turn on A simple restart is a great place to start when attempting to fix an issue with your iPad. Let go of the Top button, then move the slider left to right to turn off the device.
To restart the iPad, hold down the Top button until the Apple logo appears. To restart the iPad, hold down the Top button until the Apple logo appears.
Continue to hold the Home button while you connect the iPad to the computer.
Continue to hold the Top button while you connect the iPad to the computer. If this process takes too long, your iPad will exit recovery mode. If you’re unable to update your iPad software, you may need to restore your device from a backup or complete a factory reset.
5 Ultimate Methods to Fix iPad Stuck on Apple Logo
The last thing anyone wants is to find their iPad stuck on Apple logo, as it effectively makes their tablet unusable. The solutions range from simple actions you can take right now to using a third-party tool and leading up to more involving efforts such as a restoration.
Much like an iPhone or practically any other computing device on the market, the problems that can cause an iPad to fail to boot properly are fairly typical and can be generalized into a few categories. Connected to that, the iPad can also fail to boot because files in the operating system have degraded, even without any updates being applied.
Those who’ve jailbroken their iPad will also see this sort of problem since the act of jailbreaking involves modifying the operating system. Though software and data is considered to be the main reason for an iPad to become disabled, it’s also plausible that an actual hardware problem could be at fault. If it is too low on power, the iPad won’t turn on stuck on Apple logo on the screen. Hardware like tablets and smartphones need a small amount of power to actually boot up.
Leave it turned off and with a charger plugged in and providing power for a period of time, such as ten minutes or more.
If you have recently run an operating system update on your iPad, the tablet may need to reboot to install everything. While Fix 4 is Apple’s own method for restoration, you may not want to go down that route, since it will involve the loss of your personal data from your iPad. It offers over 150 system issue fixes for iOS and iPadOS, such as solving reboot loops, black screens, and the sticking Apple logo, without data loss, and it can also allow you to reset your device without using a password.
The only downside to this method, and later ones, is that you do need a Mac or PC to perform the repair, as well as a USB-to-Lightning cable. Once installed, connect your iPad to the computer, launch the tool, and click Start on the iOS system repair module.
Within macOS, users instead have a similar interface within the Finder, offering the same level of synchronization and management. It is also able to be used to back up your devices, and crucially for this problem, allows you to recover a connected iPad attached using a USB-to-Lightning cable.
If your iPad is stuck on Apple logo after update and it won’t boot, this may be a good option, but not without one crucial problem. The macOS Finder and iTunes in Windows will show similar views when you connect an iPhone or iPad to it.
After downloading, installing, and launching UltFone, connect your iPad to your computer, then click Enter Recovery Mode.
Top 6 Methods to Fix iPad Stuck on Apple Logo during Update
iPad Users may face this issue due to various reasons This may include jailbreaking of the iPadOS or problems during updating to the new version iOS. Part 1: Common 4 Fixes for iPad Stuck on Apple Logo after Reset/Update iPadOS 16/17
Most of the times, starting from the beginning helps you to get a clear view and new approach towards the problem. All you need to do is restart your device if you want iPad stuck on Apple logo fix without restore. After you swipe as per the instruction, long press the power button again till your device is switched on. The next step is to perform a force restart or hard reset iPad, which can often resolve minor software glitches. Recovery mode comes in handy when your Apple device is facing issue due to a problem in any beta update of the software. If you feel this process to be time consuming and confusing, you can opt for Tenorshare ReiBoot that can enter and exit your device into recovery mode in a single click free of cost.
Download and install the program on your PC or Mac, launch the software and connect iPad to computer.
10 Ways to Fix iPad Stuck on Apple Logo Screen in 2023
“When I turn on my iPad, it comes up to the Apple logo screen and stays that way forever. Have you ever encountered the iPad stuck on the Apple logo after an update to iPadOS 15?
Recently, I have received many complaints or reports, such as “my iPad won’t turn on past the Apple logo” “iPad stuck on white screen with Apple logo” “Apple logo won’t go away on iPad”… How to Fix iPad Stuck on White Apple Screen?
Before we move further to troubleshooting methods, let’s check the possible causes of the iPad white screen with Apple logo. How to Fix iPad Stuck on White Apple Screen?
Try the following solutions if your iPad only shows the Apple logo then turns off. When the iPad doesn’t go past the Apple logo, you can restart it with the following steps.
Release the Top button and pull the slider from left to right to power off the iPad.
Hold the Top button until the Apple logo shows up on the screen. Press and hold the Top + either of the Volume buttons together until the slider turns up. Hold the Top button until the Apple logo displays on the screen.
You can check if your iPhone is unlocked without a SIM card with this proven guide. In this case, you can conduct a complete check of these components to see if it is a hardware issue.
Press and hold the Home + Power buttons spontaneously for 10 seconds. Release all keys when the device reboots and you see the Apple logo.
Press and hold the Top button until it reboots and the Apple logo appears. See also: It is easy to retrieve text messages on an iPad in 5 ways.
If the iPad is stuck on the Apple logo, but the hard reset is not working, check if you have installed any third-party security software on your device. As some third-party software may wrongly report the device as a danger or interrupt the data transfer process, you’d better uninstall the app or turn it off before connecting your iPad to iTunes.
Continue holding the button(s) until the recovery mode screen appears. You can also try booting your iPad into DFU mode and restoring it with iTunes. If it works, your iPad will restore to normal status in a few minutes. Connect your iPad to the computer via a USB cable and open the latest version of iTunes.
Press and hold the Home + Sleep / Wake buttons spontaneously for 10 seconds. Press and hold the Power button for about 10 seconds until the screen becomes black.
Open the latest version on the computer and connect your iPad via a USB cable. It is a professional iOS system repair tool that can repair most iOS system errors without data loss, including iPad black screen of death, iPad stuck on Apple logo, etc. * Repair various scenarios on iPhone/iPad/iPod without data loss: Stuck on DFU mode/Apple logo/recovery mode, Blue/white/red/black screen of death, battery drain, loop restart, iTunes error 4005/4013, etc. How to fix iPad stuck on Apple logo without data loss?
The program will detect the iPad problem automatically and show it on the interface. Once done, click Repair to fix the iPad stuck on the Apple logo issue at once.
How to Fix the iPhone Stuck on Apple Logo Issue
If your iPad still gets stuck on the Apple logo after using the above methods, it may have severe physical damages.
Don’t forget to bring the purchase receipts if your device is still under warranty. We hope this tutorial will help you successfully resolve the iPad stuck on the Apple logo.
We recommend you try iPad System Recovery directly before contacting Apple Support to save your time. It is best to fix various iOS system issues and software problems without data loss. 9 Tricks to Fix iPhone White Screen of Death without Effort (Updated)
5 ways to unfreeze your iPad after it’s stopped responding, including a force-restart
Certain apps that have become corrupted might need to be deleted and reinstalled if they freeze or crash often. Simply forcing an iPad to power down and then turning it back on is the most reliable way to unfreeze it, but this approach will also mean losing any progress you have made and haven’t saved. When it comes to computers and tablets, one way to deal with a frozen device is to put it down, walk away, and give it a few minutes to work. Like a watched pot that doesn’t boil, a frozen iPad seems never to come back, but with a bit of time, it just might.
If your iPad won’t turn on or has become unresponsive, chances are good that it’s very low on battery (or fully drained). Connect it to a power source and leave it alone to charge for an hour.
Hold the power button on top of an older iPad (or hold the the power button and one of the volume buttons on an iPad with Face ID) until the swipe to power off toggle appears, and swipe right to shut the iPad down. Your frozen iPad may be dealing with software issues that can be assuaged with a reset, but know that you will lose some data in the process.
Launch the Settings app and tap the General tab. And if none of these fixes work, the good folks at the Genius Bar at your nearest Apple store can diagnose the issue using hardware (and know how) not available to the rest of us.
How to Use iPad Recovery Mode
Recovery Mode: Connect the iPad to a computer, open Finder (Catalina or later) or iTunes. If you don’t have access to a computer, use the Find My app to wipe the iPad remotely.
This article explains how you can force your iPad into Recovery mode if it’s locked or stuck at the Apple logo. Instructions apply to iPadOS 13 or later on macOS Catalina (or later) or Windows 10.
If the iPad freezes at the Apple logo, you’ll need to force it into Recovery Mode. If you’re using a Mac with macOS Mojave or earlier, or if you’re using a PC, you’ll use iTunes.
If your Mac has macOS Mojave or earlier, be sure to download the latest compatible iTunes version. If a new version of iTunes is available, the app notifies you (or, you can select Help > Check for Updates).
On a Mac with macOS Mojave (10.14) or earlier, or on a PC, open iTunes. With iTunes open and the iPad connected to the computer, perform one of the following tasks: iPad with Face ID : Press and quickly release the Volume Up button, press and quickly release the Volume Down button, and then press and hold the top button until the iPad enters Recovery Mode. If you backed up your iPad using iCloud or iTunes, you can recover everything up to the point of the backup.
Be First to Comment