These instructions will work to put any iPad model with a Home button into DFU mode. The DFU mode process for iPad is close to the same process as entering into iPhone DFU mode (or iPod touch for that matter) on devices that have a clickable Home button, but it’s different from later models that don’t have the Home button at all. Overall it’s pretty easy, just follow the instructions below to learn how to enter into DFU mode on iPad.
The key thing to remember with DFU mode is the screen stays black, but iTunes alerts you to the device connected and ready for a restore.
How to Enter DFU Mode on iPad Air (2020 Model)
If you have a new iPad Air model (2020 or later), you might be wondering how you can enter and exit DFU mode on the device, typically for troubleshooting purposes. This has changed as the new iPad Air no longer has a Home button, making it more closely match the Pro series.
So whether new to Apple’s iPadOS ecosystem, or simply upgrading from an older iPad with the home button, you may find this to be useful. DFU stands for Device Firmware Update which is a lower level restore capability than Recovery mode.
Next, you’ll need to connect your iPad Air to a computer with the latest version of iTunes using the USB-C cable that came in the box. If you have no intention of updating, restoring, or downgrading the software on your iPad Air and you did it just to check out DFU mode, you can safely exit by following the steps below.
Keep in mind that these button presses should be done in quick succession to properly exit DFU mode on your iPad.
How to put your iPhone or iPad in DFU mode to fix it as a last resort
To put an iPhone or iPad into DFU mode, you’ll need to use either iTunes or Finder. DFU mode works differently on iPhones and iPads with Face ID, compared to older models.
Your iPhone or iPad can sometimes run into technical issues, requiring the device to be reset or restored. However, if it can’t be recovered through its settings, this can complicate efforts and require the use of iTunes or Finder to restore the device’s operating system and firmware.
Here’s how you can use DFU mode and a computer to restore your iPhone or iPad when it cannot recover itself. It exists “below” the operating system level — iOS — but can still communicate with iTunes or Finder on a Windows or Mac computer.
In DFU mode, your iOS device is accessible to iTunes or Finder at a more privileged level. To put an iPhone or iPad into DFU mode, follow the instructions based on which model you have. Turn off your iPhone or iPad and plug it into your Mac or Windows computer. PCs and Macs running macOS Mojave or earlier will need iTunes.
If the screen is illuminated but blank, your iPhone has now entered DFU mode. If the screen is illuminated but blank, your iPhone has now entered DFU mode.
To enter DFU mode on iPhones generation 6S or earlier, you’ll use the Home and side buttons. If the screen is illuminated but blank, your iPhone has now entered DFU mode.
How to put your iPhone or iPad into DFU mode
When you’re thinking about jailbreaking your iPhone, or even un-jailbreaking, updating it from an old and expired iOS beta, or just need a solution when everything else has failed and the issue persists, then you probably need to go into DFU (Device Firmware Update) mode. With DFU mode, think of it as a nuclear solution when nothing else works — this is definitely a last resort kind of fix.
It lets you get a borked device back into proper, working order by putting it into a specific state that can still communicate with iTunes on Windows, or Finder on Mac. Having the device in DFU mode lets you restore it, no matter what state it is in. How to put your iPhone with Face ID into DFU mode So getting into DFU mode can be a little more tricky than older iPhone models.
At this point, iTunes or Finder on your computer should have detected an iPhone and allow it to be restored. How to put your iPad Pro with Face ID into DFU mode
Since the 3rd-generation iPad Pro (2018), Apple got rid of the Home Button and Touch ID on current iPad Pro models in exchange for Face ID, just like with the higher-end iPhone models.
Plug in your iPad Pro with Face ID into your Mac or PC. Press and hold the Power button for 3 seconds, until the screen turns black. Remember, if the “Plug into iTunes” screen comes on, you’ve held the buttons down for too long and need to try again.
If the screen remains black but is illuminated, your iPad Pro is successfully in DFU mode. Iphone Se 2022 Black (Image credit: Christine Romero-Chan / iMore)
Press and hold the side button until the power off slider appears. If the screen stays black but is lit up, your iPhone 7 or 7 Plus should now be in DFU mode. How to put your iPhone 6s or earlier, iPad (with Home button), or iPod touch into DFU mode Plug in your iPad or iPod touch to your Mac or Windows PC.
At this point, iTunes or Finder should show you an alert saying it has detected your iPad or iPod touch and will allow it to be restored. DFU mode can fix most of your iPhone issues if nothing else works
If you’re experiencing some issue with your device that nothing else seems to help with, then restoring in DFU mode is probably your best bet.
How to put your iPhone or iPad into DFU mode
When you’re thinking about jailbreaking your iPhone, or even un-jailbreaking, updating it from an old and expired iOS beta, or just need a solution when everything else has failed and the issue persists, then you probably need to go into DFU (Device Firmware Update) mode. With DFU mode, think of it as a nuclear solution when nothing else works — this is definitely a last resort kind of fix. It lets you get a borked device back into proper, working order by putting it into a specific state that can still communicate with iTunes on Windows, or Finder on Mac. Having the device in DFU mode lets you restore it, no matter what state it is in.
How to put your iPhone with Face ID into DFU mode So getting into DFU mode can be a little more tricky than older iPhone models.
At this point, iTunes or Finder on your computer should have detected an iPhone and allow it to be restored. How to put your iPad Pro with Face ID into DFU mode Since the 3rd-generation iPad Pro (2018), Apple got rid of the Home Button and Touch ID on current iPad Pro models in exchange for Face ID, just like with the higher-end iPhone models. Plug in your iPad Pro with Face ID into your Mac or PC. Press and hold the Power button for 3 seconds, until the screen turns black. Remember, if the “Plug into iTunes” screen comes on, you’ve held the buttons down for too long and need to try again.
If the screen remains black but is illuminated, your iPad Pro is successfully in DFU mode. Iphone Se 2022 Black (Image credit: Christine Romero-Chan / iMore) Press and hold the side button until the power off slider appears.
If the screen stays black but is lit up, your iPhone 7 or 7 Plus should now be in DFU mode. How to put your iPhone 6s or earlier, iPad (with Home button), or iPod touch into DFU mode Plug in your iPad or iPod touch to your Mac or Windows PC. At this point, iTunes or Finder should show you an alert saying it has detected your iPad or iPod touch and will allow it to be restored. DFU mode can fix most of your iPhone issues if nothing else works
If you’re experiencing some issue with your device that nothing else seems to help with, then restoring in DFU mode is probably your best bet.
How to put your iPhone or iPad in DFU mode to fix it as a last resort
To put an iPhone or iPad into DFU mode, you’ll need to use either iTunes or Finder. DFU mode works differently on iPhones and iPads with Face ID, compared to older models. Your iPhone or iPad can sometimes run into technical issues, requiring the device to be reset or restored. However, if it can’t be recovered through its settings, this can complicate efforts and require the use of iTunes or Finder to restore the device’s operating system and firmware. Here’s how you can use DFU mode and a computer to restore your iPhone or iPad when it cannot recover itself. It exists “below” the operating system level — iOS — but can still communicate with iTunes or Finder on a Windows or Mac computer.
In DFU mode, your iOS device is accessible to iTunes or Finder at a more privileged level. To put an iPhone or iPad into DFU mode, follow the instructions based on which model you have.
Turn off your iPhone or iPad and plug it into your Mac or Windows computer. PCs and Macs running macOS Mojave or earlier will need iTunes. If the screen is illuminated but blank, your iPhone has now entered DFU mode. If the screen is illuminated but blank, your iPhone has now entered DFU mode.
To enter DFU mode on iPhones generation 6S or earlier, you’ll use the Home and side buttons. If the screen is illuminated but blank, your iPhone has now entered DFU mode.
Be First to Comment