The last thing anyone wants is to find their iPad stuck on Apple logo, as it effectively makes their tablet unusable. The solutions range from simple actions you can take right now to using a third-party tool and leading up to more involving efforts such as a restoration. Much like an iPhone or practically any other computing device on the market, the problems that can cause an iPad to fail to boot properly are fairly typical and can be generalized into a few categories. Connected to that, the iPad can also fail to boot because files in the operating system have degraded, even without any updates being applied.
Those who’ve jailbroken their iPad will also see this sort of problem since the act of jailbreaking involves modifying the operating system. Though software and data is considered to be the main reason for an iPad to become disabled, it’s also plausible that an actual hardware problem could be at fault. If it is too low on power, the iPad won’t turn on stuck on Apple logo on the screen. Hardware like tablets and smartphones need a small amount of power to actually boot up. Leave it turned off and with a charger plugged in and providing power for a period of time, such as ten minutes or more.
If you have recently run an operating system update on your iPad, the tablet may need to reboot to install everything.
While Fix 4 is Apple’s own method for restoration, you may not want to go down that route, since it will involve the loss of your personal data from your iPad. It offers over 150 system issue fixes for iOS and iPadOS, such as solving reboot loops, black screens, and the sticking Apple logo, without data loss, and it can also allow you to reset your device without using a password.
The only downside to this method, and later ones, is that you do need a Mac or PC to perform the repair, as well as a USB-to-Lightning cable. Once installed, connect your iPad to the computer, launch the tool, and click Start on the iOS system repair module. As a means to synchronize your mobile devices to a PC, iTunes is a well-known piece of software. It is also able to be used to back up your devices, and crucially for this problem, allows you to recover a connected iPad attached using a USB-to-Lightning cable.
If your iPad is stuck on Apple logo after update and it won’t boot, this may be a good option, but not without one crucial problem. The macOS Finder and iTunes in Windows will show similar views when you connect an iPhone or iPad to it. After downloading, installing, and launching UltFone, connect your iPad to your computer, then click Enter Recovery Mode.
8 ways to fix it. What are these ways?
The eight solutions are based on three unique situations that users will likely encounter when tackling the iPad black screen issue. This article also has a step-by-step guide so users can practically implement the solutions on their iPads. Using proper preventive techniques like regular iPadOS updates, installing applications from the Apple store only, and using the original Apple charger and lightning cable can reduce the chances of getting a black screen on your iPad.
Collectively, all the iPhones and iPads in the Apple lineup are prone to this issue. Since this issue is quite common, users in the Apple community have developed many troubleshoots that can help fix an iPad screen blackout. Luckily, the iPad’s black screen of death is fixable most of the time, so don’t panic just yet.
Older iPads are more likely to experience the black screen of death than new out-of-the-box devices. If this doesn’t work a full hard reset and restoring the iPad may be needed.
Damaged components will cause black screen on iPad and again it’s best to seek advice from a professional repairer. If you have not already checked ensure the iPad isn’t just flat and the charger is failing to charge the battery up. If your iPad screen suddenly goes black, and you cannot see images or hear any notifications, try the following fixes. When charging, make sure you are using the original Apple-supplied charger and lightning cable.
Every iPad charging port is susceptible to damage because it receives the most wear and tear as it is constantly being used every day. For an older iPad with a home button with Touch ID, the process is as follows,
Once the Apple logo has appeared, release the buttons and wait for the iPad to reboot. Press and hold the power button until you see the Apple logo on the screen.
Any apps that are malfunctioning should be uninstalled to avoid it causing problems like a black screen. If your iPad screen is black, but it’s still making noise, the good thing is it’s not completely dead. A minor reason that can cause this is accidentally turning the screen brightness down all the way. If you can hear the notifications and alerts on your iPad, but the screen stays black, try the following fixes.
The readings from the ambient light sensor will be skewed if it is not working properly. As a result, the auto brightness feature can cause the screen to turn black because the data provided by the ambient light sensor is not correct. To fix this issue, simply disable the auto brightness option on your iPad. The iPad will also not show the display if the screen ribbon cable is damaged or disconnected.
The screen ribbon cable connects the display to the logic board of the iPad. This fragile cable gets damaged when the iPad is dropped on the floor or if it hits a hard object. Keeping the auto brightness off will stop the light sensor from turning the screen off in the future. Then, press and hold the power button until the device boots to the recovery screen.
Updating the iPadOS does not erase any existing data or user files present in the device. Still though, you should always periodically backup your data on iCloud or other similar cloud-based storage solutions.
The next solution we are going to talk about is to erase all data present on the physical storage drive of the iPad. It has a good chance of solving the iPad black screen, granted the issue is due to unstable or corrupt firmware.
To prevent this issue, try putting a cover on your device to avoid damage to the iPad’s screen.
Keeping the iPad up to date will ensure all the programs and system will run smoothly. If you have tried resetting the iPad black screen using all of the above-listed methods and nothing seems to work, then perhaps the issue is too complex and deep-rooted. If the iPad still isn’t working after you hard reset it, try plugging it into the computer and see if you can use it from there.
If you don’t know how to do this, seek advice from Apple, as messing around with the screen can cause more problems to occur. Unfortunately, sometimes there are faults that occur within the iPad’s components that are out of our control, and there is no way to prevent them. Go to restore so it can begin to start reinstalling the operating processors and the firmware. For a problem with the components, it’s best to get Apple to check over the iPad and advise what the next steps will be. Keep the iPad covered to protect it from moisture, dust, and drops. If the iPad is updated, it will help avoid problems like firmware corruption.
There are a few things that can cause your iPad to have the Apple logo appear on the screen then turn off. If you downloaded malware, most likely from opening a link in your email or chat, then it can cause the phone to malfunction. In some cases, it can fix the problem of the Apple logo appearing on the screen and then disappearing especially if it is a minor glitch or malware that isn’t too complex.
Try another charger and let the iPad charge for 30 minutes to see if that fixes the problem. Replacing the charger every 12 months is a good idea to keep them functioning at their best. Try not to open any links that are not from reputable companies in case they are forms of malware that can wreak havoc on your iPad.
In the latest iOS version, there is a feature for the display that is called grayscale mode. You may have accidentally turned grayscale mode on without realizing not to worry, it is easily fixed. Unfortunately, you find that when you unplug it from the charger in a short period of time, the screen will go black.
To fix this problem, you will need to send the phone to Apple and have a new battery installed.
While it is easy to put your phone on charge overnight, it is a bad habit that will degrade your battery fast. First, try replacing your charger and letting the iPad charge for 30 minutes,, and try to turn the phone on.
You can try performing a soft reset, but if the battery is the problem, it will need to be replaced by an Apple repairer. Avoid charging your device in bits and pieces for 30 minutes here and then 2 hours there.
Jailbreaking phones and iPads is not a good idea and can corrupt the device beyond repair.
In some cases, it can happen immediately; in others, it can take a day or two for the screen to die. Avoid jailbreaking your device as it only causes problems for the system and will drastically reduce the iPad’s life. As soon as you sense an app is taking longer to load or seems to freeze, uninstall it immediately to avoid causing problems with the iPad.
If you update the phone and the battery dies before it can finish installing, it can cause a black screen. Try charging the iPad for 30 minutes with a different cable and charger, preferably an Apple-branded one. Try conducting a soft reset of the iPad in case there is a glitch, and the system is stuck. Press and then hold the sleep button and the volume down key for a few seconds Always try to keep a heavy-duty cover on the device and a screen protector to protect it from drops and bumps. A hardware problem such as a loose cord, cracked screen, and motherboard damage.
If those solutions don’t work, it may be a hardware problem, and you will need Apple to repair the device. If the restart doesn’t work the iPad will need to be sent off to Apple for repair.
It is not a job that inexperienced people should be doing due to the small parts that you can cause more damage to if you don’t know what you are doing.
Dropping or mishandling the iPad is usually the cause of this unless it was a faulty machine from the start. Ensure you have a hard cover on the iPad and carry it around in a bag to protect it should you drop it. Changing the screen on an iPad is a costly repair and will set you back quite a lot of money.
*Data in the given table is based on Simply Fixable’s market research and the official Apple website To prevent the iPad screen from going black again, make sure you are following the right protocols: Update the iPadOS regularly, don’t install applications from third-party sources, and use the original Apple charger and lightning cable.
Doing this may not fully eliminate the risk of getting the iPad black screen of death, but the chances will be reduced significantly.
Hollie is a technical writer with over 15 years of experience specializing in creating content to help keep the rest of the world informed and updated on all tech-related subjects. Hollie has created content for many writing platforms in the tech and IT industry, and her passion for turning words into helpful articles is still growing. When she isn’t creating content for the web, she is enjoying a crazy life with her family and friends.
iPad Stuck in Reboot Loop? Here Are 4 Solutions
iPad boot loop problem is common and can be caused by several factors including a jailbreak that didn’t go as planned, an iPadOS upgrade to 15/14/13, or even a virus attack. We are going to show you how you can get your iPad out of this reboot loop in just a few minutes without losing any of the data on the device. One of the easiest ways tofix an iPad that is stuck in the reboot loop is to hard reset it. With the right tool and the right operation, you can get your iPad out of this boot loop without losing any of the data on your device. It is a reliable tool for personal use and supported by a strong technical team that has many products recommended by Payetteforward, Makeuseof, and other famous media sites. It is a reliable tool for personal use and supported by a strong technical team that has many products recommended by Payetteforward, Makeuseof, and other famous media sites.
iMyFone Fixppo Key Features: You can exit the ‘support.apple.com/iphone/restore’ screen with only 1 click for free . Standard Mode of Fixppo can fix the iOS issues without losing any data .
Launch it and from the main window, select “Standard Mode” from the 3 options.
Some iPads stuck in a restarting loop can be recognized by Fixppo, then you can go to the next step. Step 4 Once the firmware is download, click “Start” and then Fixppo will begin repairing the iOS system. Please remember, this method will wipe off all your data on the iPad and restore it to factory settings.
Your device will be restored, eventually, solving the iPad boot loop issue. iPad Stuck in Boot Loop When in Low Battery or Charging If your iPad turns on and off in a loop when it is charging or it has a low battery, here is a solution worth trying. Plug your USB charging cable to the wall power outlet.
You need quickly plug in the charger again because the home screen only appears in a flash. iMyFone Fixppo – Downgrade iOS 17 Beta without Jailbreak One-click to reset your device without needing any passwords.
My iPad wont turn on? but apple logo appe…
Problem is, its gone beyond a point and now and there isn’t enough battery life to boot to main or home screen after apple logo. The remedy is quiet simple, follow these steps to get the ipad to home screen to power it down so it has sufficient time to charge up and boot normally and get off the endless loop.
should now power down and reboot Repeat step 3 at least 30 to 40 times which is about 10 minutes in duration everytime you see the logo appear on the screen. Now Let IPad boot up fully, should see home screen with about 2% battery life QUICKLY hit the rest/ sleep button down for about 2 to 5 seconds.
Hopefully this will assist anyone going through the same pain, and possibly not have to buy another one which seems to be the case when people take the pad to an istore with the same issue.
5 Ultimate Methods to Fix iPad Stuck on Apple Logo
The last thing anyone wants is to find their iPad stuck on Apple logo, as it effectively makes their tablet unusable. The solutions range from simple actions you can take right now to using a third-party tool and leading up to more involving efforts such as a restoration.
Much like an iPhone or practically any other computing device on the market, the problems that can cause an iPad to fail to boot properly are fairly typical and can be generalized into a few categories. Connected to that, the iPad can also fail to boot because files in the operating system have degraded, even without any updates being applied. Those who’ve jailbroken their iPad will also see this sort of problem since the act of jailbreaking involves modifying the operating system. Though software and data is considered to be the main reason for an iPad to become disabled, it’s also plausible that an actual hardware problem could be at fault.
If it is too low on power, the iPad won’t turn on stuck on Apple logo on the screen. Hardware like tablets and smartphones need a small amount of power to actually boot up.
Leave it turned off and with a charger plugged in and providing power for a period of time, such as ten minutes or more. If you have recently run an operating system update on your iPad, the tablet may need to reboot to install everything.
While Fix 4 is Apple’s own method for restoration, you may not want to go down that route, since it will involve the loss of your personal data from your iPad. It offers over 150 system issue fixes for iOS and iPadOS, such as solving reboot loops, black screens, and the sticking Apple logo, without data loss, and it can also allow you to reset your device without using a password.
The only downside to this method, and later ones, is that you do need a Mac or PC to perform the repair, as well as a USB-to-Lightning cable. Once installed, connect your iPad to the computer, launch the tool, and click Start on the iOS system repair module. As a means to synchronize your mobile devices to a PC, iTunes is a well-known piece of software. It is also able to be used to back up your devices, and crucially for this problem, allows you to recover a connected iPad attached using a USB-to-Lightning cable.
If your iPad is stuck on Apple logo after update and it won’t boot, this may be a good option, but not without one crucial problem. The macOS Finder and iTunes in Windows will show similar views when you connect an iPhone or iPad to it.
After downloading, installing, and launching UltFone, connect your iPad to your computer, then click Enter Recovery Mode.
ipad stuck on apple logo screen
I had the very same issue, couldn’t go past the apple logo black screen.
5 Easy Ways to Fix iPad Shows Apple Logo then Goes Black on iOS 17
If your iPad shows Apple logo then goes black, chances are it has an issue with its software. Use the official Apple certified charger and cable to charge your iPad. Force reboot resets many temporary items on your device and allows your operating system to boot-up in a fresh mode. Force Reboot iPad with Face ID: Press Volume Up and let it go.
Restoring your device basically reinstalls the entire iOS operating system on your iPad. Fix iPad Only Shows Apple Logo Then Turns Off with ReiBoot If you have not had luck with any of the above methods, it is time you turn to a professional iOS 17 beta repair software to fix the issue.
The iPad 2 just shows Apple logo issue can also be fixed with this software and it will only take a few clicks and you are all set. Contact Apple for Help If none of the above methods worked for you at all, there might be a serious issue with one of the hardware pieces of your iPad.
In that case, it is suggested that you directly get in touch with Apple and let them deal with the device. Which is the Best Way to Fix iPad Only Shows Apple Logo The following table will help you compare each of the aforementioned methods. You can choose the best way to fix iPad showing apple logo only.
My iPad is stuck on the apple logo keep f…
This step is advised as a battery with very low charge, or is failing, may produce symptoms that emulate a boot loop. If the problem fails to stabilise after an hour, whilst still connected to the Power Adapter, attempt a forced restart of the iPad: If you don’t have access to a suitable computer of your own, that of a helpful friend or family member will suffice.
iPad stuck on the Apple logo? Here’s how to fix it
You sit down to watch a movie or read a book on your iPad®, but when you turn it on—the screen freezes. Don’t worry, at Asurion our experts help millions of customers resolve issues like this every day—on all their favorite devices—from laptops that won’t connect to Wi-Fi to unresponsive iPad screens. Here’s our step-by-step guide on how to fix an iPad that won’t turn on, so you can get back to Game of Thrones (whether it’s the book or the television series). Why your iPad is stuck on the Apple logo or won’t turn on
A simple restart is a great place to start when attempting to fix an issue with your iPad. Let go of the Top button, then move the slider left to right to turn off the device. To restart the iPad, hold down the Top button until the Apple logo appears. To restart the iPad, hold down the Top button until the Apple logo appears. Continue to hold the Home button while you connect the iPad to the computer. Continue to hold the Top button while you connect the iPad to the computer. If this process takes too long, your iPad will exit recovery mode. If you’re unable to update your iPad software, you may need to restore your device from a backup or complete a factory reset.
Top 6 Methods to Fix iPad Stuck on Apple Logo during Update
iPad Users may face this issue due to various reasons This may include jailbreaking of the iPadOS or problems during updating to the new version iOS. Part 1: Common 4 Fixes for iPad Stuck on Apple Logo after Reset/Update iPadOS 16/17
Most of the times, starting from the beginning helps you to get a clear view and new approach towards the problem.
All you need to do is restart your device if you want iPad stuck on Apple logo fix without restore. After you swipe as per the instruction, long press the power button again till your device is switched on. The next step is to perform a force restart or hard reset iPad, which can often resolve minor software glitches.
Recovery mode comes in handy when your Apple device is facing issue due to a problem in any beta update of the software. If you feel this process to be time consuming and confusing, you can opt for Tenorshare ReiBoot that can enter and exit your device into recovery mode in a single click free of cost.
Download and install the program on your PC or Mac, launch the software and connect iPad to computer.
Be First to Comment