There are actually multiple reasons why your iPad flashes the Apple logo, and depending on what you may have done to your device, you will need to use an appropriate method to fix the issue. This guide focuses on why the iPad flashing Apple logo when charging and what possible methods you can use to resolve the issue.
The core reason why your iPad 1 Apple logo flashes on and off is because there is an issue with the boot-up routine of your device. When an issue is found with this routine, your iPad cannot boot-up normally and it starts flashing the Apple logo. : If your iPad is jailbroken, maybe something went wrong during the jailbreaking process and that is what is causing the flashing Apple logo issue on your device. Check the USB Port & Lightning Cable If iPad flashing Apple Logo When Charging If the iPad 2 flashing Apple logo on and off issue occurs when you are charging your device, it is highly likely due to the faulty cable and port that you are using. Force Restart an iPad with Face ID Press the Volume Up button and release it. Press and hold down Home and Power buttons on your iPad to bring it into the recovery mode.
The following is how you fix the iPad Apple logo flashing while charging issue using DFU mode. Keep holding the home button until until you see this message on the screen: “iTunes has detected an iPad in recovery mode.
The iPad keeps flashing Apple logo could just be one of the issues with your iOS system and you are going to need to use a third-party software to fix it. Tenorshare ReiBoot is a perfect software to fix all the iOS-related issues on your devices.
iPhone/iPad Flashing Apple Logo? Here’s Why and How to Fix it!
If verification fails, your iPhone will keep flashing the Apple logo and doesn’t go further. If this issue happens after you connect it to a laptop or PC, you can simply replace the USB cable for a fix. Low battery, interrupted restore or data transfer, faulty accessories, software crash, hardware damage, etc can all lead to a flashing Apple logo on your device.
It may also be the case that the update packages were fine but later got corrupted and stopped the system at boot.
The iOS would identify the computer or cable as a threat to the iPhone and automatically terminate the boot process. Jailbreaking Jailbreak allows you to unlock administrator permissions on iOS, so when you directly alter your iPhone’s operating system, it may cause software compliance concerns, resulting in the flashing Apple logo.
If an app is poorly developed, it might drain your device’s battery, consume more local storage than necessary, and even cause it to crash or flash the Apple logo due to incompatibility. Water is an excellent conductor and can put different circuits in contact with each other, destroying electronic components once you turn it on instantly, including the motherboard. Step 1: Charge your device Before proceeding, make sure to plug your iPhone or iPad to a stable power source for half an hour.
If your iPhone or iPad is back to normal, congrats, otherwise move to the next step.
A hard reset doesn’t delete your data, so it’s safe to do it without creating any backup. If your device is now booting normally after a forced reboot, quickly skip here to see what you should after it’s turned back on.
Step 3: Fix iPhone/iPad Flashing Apple Logo with a Computer Via Mobitrix Perfix Mobitrix Perfix is a professional iOS system repair tool used to fix various problems on iPhone, iPad and iPod, including flashing Apple logo, black screen death, boot loop, etc. It is super simple to use, taking only a few clicks, and can fix any iOS issue within 30 minutes. If you are using a PC or a Mac running macOS Mojave or earlier, then install the latest version of iTunes. iPhone 7 series: Hold the top (or side) and volume down buttons together until the recovery mode screen appears.
iPhone 6 or earlier: Press and hold both the Home and the top (or side) buttons together until the recovery mode screen shows up. Now iTunes will say that it has detected an iPhone, iPod touch, or iPad in recovery mode. DFU Mode Once finished, your device will totally be restored to its factory settings. Step 4: What should you do after turning your iPhone/iPad back on？ To avoid the flashing Apple logo again, you can do a bit more with faulty apps and storage space to take better care of your device. On the other hand, unused apps can take up your storage space, making your device load slow.
As a result, your iPhone may refuse to get past the home screen but keeps flashing the Apple logo. Now, connect your iPhone or iPad to a wireless network, so as to avoid extra threshold charges and to have a faster download speed. If you have smashed your device recently, or spilled water over it, chances are the methods above won’t help you much.
iPad won’t turn on? 5 recommended resolutions from the iSmash experts
There are two possible outcomes of dropping your iPad; either the screen is brokenor the motherboard is damaged. You can personally test for the first scenario, by using theto see if your iPad is on, but the screen is not working.
So if you’re having issues turning your iPad on, have a think about whether it has had any contact with liquid, because even a small drop can damage the internal hardware. Unfortunately if your device is water damaged, it won’t be covered by the 1-year Apple warranty.
iPad Flashing Apple Logo? How to Restore It to Normal State
Although it can happen anytime you reset or restart the iPad, most users report that they see this problem most commonly when they connect the device to a charger. There are a lot of reasons why your iPad may be behaving in this way and although the device may appear useless, there are steps that you can take to restore it to normal function.
But as they will be quick to point out, this is just a temporary solution and if it works, then it means that a hardware component on the device is broken or damaged. This is also a common problem if there is an issue with the charging process itself, which is why your iPad may get stuck on the flashing Apple Logo soon after you connect it to a charger.
It is therefore a good idea to check the USB port and lighting cable that you are using for any obvious signs of damage. Start by checking the computer’s USB port to see if there is any dust, dirt or lint that may affect the charging process.
Connect the iPad to charger and allow it to charge for up to 30 mins before attempting to restart the device again. It also doesn’t hurt that it is very easy to use; the following simple steps will guide you to repair your iPad easily; TinyFix will resolve the flashing logo issue, allowing your iPad to get back to normal function. This is a solution that is highly effective if the iPad has a corrupt operating system that can happen if an iOS update was interrupted or failed to complete. Restoring your iPad in recovery mode can risk all the data on your device, so if you are uncomfortable with any of the solutions we have outlined above, you may want to seek help from Apple-certified technicians. You can make an appointment at your local Apple Store to get the device repaired and the technicians will diagnose the problem and easily resolve it for you.
An iPad that stuck on the flashing logo is an all-too common problem that can occur for a number of reasons.
Be First to Comment