Press "Enter" to skip to content

Plantronics Headset Pairing Usb

Your Bluetooth USB adapter comes pre-paired to your Voyager PRO UC headset. In the event that your headset and Bluetooth USB adapter are not paired or become unpaired do

Place the headset in pairing mode by pressing and holding the power button until the

turn solid blue to indicate the headset is connected to the Bluetooth USB adapter.

Headset will exit pairing mode.

How to Pair My Plantronics Voyager 5200

If you made it to this blog, you’re probably wondering how to pair your Voyager 5200 headset with your mobile phone or BT600 USB adapter. While wearing the headset on your ear press and hold the black call control button, located at the end of the microphone boom arm, for 3-5 seconds.

Step 3) Select “PLT V5200 Series” from the Bluetooth menu on the mobile device. On the Iphone you can navigate to Settings>Bluetooth and on that screen, you will see the Voyager 5200 under “Other devices” towards the bottom and simply just click that button.

The Plantronics BT600 USB dongle is very small and needs to be plugged directly into a laptop or computer to get it set up properly. You may need to use a pen or paper clip to press and hold that small circular button on the side of the BT600 USB dongle.

Press and hold the pairing button for 3-5 seconds until the light on the front of the USB dongle starts to flash red and blue. While wearing the headset press and hold the black call control button on the end of the microphone boom arm for 3-5 seconds.

The lights on both devices will stop flashing red and blue and the Plantronics Voyager 5200 will make an audible sound saying “pairing successful”

If you are pairing your Voyager 5200 to either a mobile device or to the BT600 USB dongle it is a very quick and easy process as outlined above and it shouldn’t take but less than a minute for each procedure.

3 Step Plantronics D100 USB Pairing Guide With Savi W440 Wireless Headset (Video)

Press and hold the volume down control on your Savi W440 wireless headset until a white LED appears, then release. When the Plantronics D100 USB adapter goes solid green and the white LED light turns off on your Savi W440 earpiece, the two are now paired.

How do I Pair and use the Plantronics Voyager Focus?

1) To put your headset in pair mode, press and hold the power button towards the Bluetooth icon until you hear “pairing” and the headset LEDs flash red and blue. If not, put the headset in pairing mode by pressing and holding the power button towards the Bluetooth icon until you hear “pairing” and the headset LEDs flash red and blue. NOTE: Your headset can pair with up to 8 devices but only maintain 2 connections simultaneously; this includes the Bluetooth USB adapter. Play, pause and skip are on the same side in the center of the ear pad. Your battery and headset usage indicator light is just below the power/call answer button.

How do I pair the Plantronics Savi Go Bluetooth headset with another device or the adapter?

Release the button when the indicator lights on the headset begin to flash red and blue. NOTE: To pair the headset to the USB Bluetooth adapter, continue with the remaining steps. The USB adapter will show a solid blue light when connected to the headset. Verification Source: Plantronics Savi Headset with Bluetooth USB Adapter User Guide

Be First to Comment

Tinggalkan Balasan

Alamat email Anda tidak akan dipublikasikan. Ruas yang wajib ditandai *

Mission News Theme by Compete Themes.