International customers can shop on www.bestbuy.com and have orders shipped to any U.S. address or U.S. store.
cell phone holder for car
Plug in the mounts 12V adapter into your vehicles power outlet and the LED indicator will illuminate to let you know the 12V & USB ports are ready to use.
Webcontactus.com: Find Business Contact Information
Our Business directory offers quality and professionally edited company listings, which are organized in the most relevant categories that enable customers to easily, locate businesses and businesses to easily find customers.
DINGLOT Best Buy Long Neck Arm Car Mobile Phone Holder Stand Cradle Universal Phones Holder Windshield 360 Rotate Dashboard Mobile Holder Price in India
Redesigned with phone safety and driver convenience in mind, the new design features a one-button rear release that unlocks the holder arms. The new button position also makes it more convenient to grab the phone so it doesn’t accidentally slip away as the arms unlock.
By flattening the surface area, a flat suction cup can create a tighter grip as less air is allowed to be caught underneath.
Best mobile phone holders 2020
Just about all of us carry phones in our cars, but holding a mobile behind the wheel is a serious offence, with penalties of up to six points and a £200 fine, plus an automatic ban for new drivers. With any, make sure your forward visionisn’t obstructed; and with phones getting ever bigger, it’s wise to check yours will fit before you buy.
Allowing phones to be easily and safely fitted and removed one-handed gained extra marks. We also entered a route into a sat-nav app and checked if vibrations made it hard to read the screen.
It came with two steel plates (circular and oblong) for fitting to the phone or case so it would ‘stick’ to the large magnet which could be twisted to any position on the ball and socket joint. Easy to fit single-handed, it worked well in landscape or portrait positions, plus was rock-solid down bumpy roads and when tapping the screen.
The phone bracket was simple, with both arms springing out manually, so two hands were required to fit, although with practice we could remove it one-handed. The bracket slotted into a base on the end of its 130mm flexible arm, the obvious benefit being that it could be turned every which way as required.
Buy now from Amazon Olixar inVent Gravity Auto-Grip Universal Smartphone Car Holder 9 Price: Around £10Rating: 3 starsContact: www.mobilefun.co.ukMounting: Air vent
Best car phone holder 2021: The easiest to use and most secure windscreen, vent and dashboard mounts
Today’s smartphones can give you easy access to satnav features with up-to-date maps and traffic info, while also allowing you to play music and podcasts as you travel. Just be aware, though, that the law is expected to change later this year, and that a wider range of interactions with your phone will be made illegal. You should stay out of trouble as long as you remain hands-free, but if you appear to be distracted by calls or by the phone screen, then you can still end up in an uncomfortable conversation at the roadside.
Set your satnav route before leaving home, and steer clear of the TikToks, WhatsApp messages and in-car selfies.
These are ideal for lighter smartphones, but the grip might not be firm enough to hold heavier devices and it also obstructs the airflow. There will, of course, have to be a cable between your car’s USB port or 12V socket and the charger, so make sure it doesn’t dangle anywhere it might obstruct your driving.
There’s also no maximum phone size to worry about – it’ll handle devices of up to 650g – and the joint means it works at a decent range of angles. Key specs – Weight: 46g; Mounting: Suction cup on windscreen; Max phone width: N/A; Colours: Black
Key specs – Weight: 130g; Mounting: Grip on air vent; Max phone width: 88mm; Colours: Black This isn’t a massive issue if you’re happy with your phone in the conventional portrait mode, but if you’re using your smartphone as a satnav, having more horizontal screen space to work with makes more sense. Key specs – Weight: 37g; Mounting: Grip on air vent; Max phone width: 93mm; Colours: Black and Aluminium The mount itself keeps a sure grip on your vent, rotating into horizontal and vertical positions, and there’s a little play in the ball joint to get a decent viewing angle for the screen.
Key specs – Weight: 90g; Mounting: Grip on air vent; Max phone width: iPhone 12 series and upwards only; Colours: Black The actual holder connects via a ball and socket joint into the supplied vent mount or dashboard/windscreen arm, while a suction cup on the latter hooks onto the windscreen or an adhesive silicone disc. What’s more, you’ve got the option to extend the arm through a nifty sliding bracket, giving you a good range of positions and viewing angles to work with.
Key specs – Weight: 260g; Mounting: Grip on air vent/windscreen and dashboard suction cup; Max phone width: 112mm; Colours: Black
This simple, compact phone holder can be attached via its suction grip to either a windscreen or a dashboard (simply turn it upside-down to switch between the two modes). Key specs – Weight: 91g; Mounting: Suction cup to windscreen or dashboard; Max phone width: 89mm; Colours: Black, red
Objectively, this is the best smartphone mount available: it’s small, avoids blocking your view, can be attached to the windscreen or dashboard and is easily moved to between vehicles. It’s also extremely stable, keeping your phone steady as you crash over Britain’s potholed streets, and has a ball and socket joint for easy adjustment.
Your phone is secured in the mount with a magnet, meaning there’s no width restriction and it’s easy to put it in place and remove it at either end of your journey. Key specs – Weight: 118g; Mounting: Suction cup to windscreen or dashboard; Max phone width: N/A; Colours: Black Key specs – Weight: 59g; Mounting: Clip to air vent; Max phone width: N/A; Colours: Black, grey The spring-loaded arms and adjustable foot hold it firmly in place, and it’ll cope with devices up to 93mm in width, aligning the phone dead-centre to give you the best wireless charging connection.
The mount fits onto the windscreen or dashboard using an ultra-strong suction cup, while the telescopic arm pivots and extends in a wide range of positions, so you can keep your phone out of the way but in view. Key specs – Weight: 430g; Mounting: Suction cup to windscreen or dashboard; Max phone width: 93mm; Colours: Black
Best phone car mounts and holders
The good news is that there are plenty of options out there, with most supporting a wide range of modern smartphones. Totallee are building a strong reputation for their solid phone cases, and it seems they’re equally adept at car mounts. The holder securely attaches to your car’s air vents, and its design means the viewing angle of your device can be adjusted by 360º. Once you plug the cable into the back of the case, simply drop your phone onto the pad and it will automatically closed to secure it in place, starting the charging process.
You can either use the adhesive suction cup attachment to stick it onto your dashboard or windscreen, or you can clip the mount directly onto your air vent. One part is a stainless steel frame that slots into the horizontal or vertical air vent, with the circular magnet facing outwards. The magnetic design allows easy 360- degree rotation of your phone without any structural clutter. Suction cup mounts allow you to place your phone almost anywhere but they can sometimes be unreliable, falling off over time.
You only need to choose a vent to put it on and the mount has two sizes for the grip depending on how thick the plastic is.
While you can plug in the phone itself to avoid this, Choetech has come up with an alternative that lets you direct power through the car mount instead. And that means less hassle when you jump out at a service station or your final destination as you scramble to disconnect wires. It uses a ball joint to achieve positioning at any angle, and clips on to an air vent so there’s no need to obstruct your view of the road.
With the Pitaka MagMount Qi, you can simply get in, attach your phone to the mount via magnets and away you go – safe in the knowledge that it’s also charging. The magnet does a great job of holding onto your phone and the ball joint gives a decent amount of adjustment.
The mount locks onto your windscreen using a suction cup and features a 10-inch, flexible arm that gains additional support from a foam dashboard rest. We like that the cradle also adds additional protection for your phone, almost like a rugged case, as its made of a shock-absorbing sponge. Instead of slotting into your car vent, howver, the Wuteku mount secures onto your dash with a heat-resistant 3M adhesive. What’s unique about this mount is that it pivots on a stainless steel ball allowing full 720-degree rotation.
The mount is compatible with phones and devices up to 5.5 inches in screen size and also fully rotatable.
Walmart Canada
SCOSCHE MagicMount Universal Magnetic Phone/GPS Suction Cup Mount for the Car, Home or Office Window
Best car phone mounts 2021: tested and rated
Finding yourself the best car phone mount can be the difference between making it to your destination in once piece and missing that concert you’ve been looking forward to since the start of the pandemic. That may sounds extreme, but being able to keep your phone, and the navigation app, in view isn’t as easy as you might have thought. While they don’t tend to break the bank, the Black Friday deals season is here and offering discounts on all manner of products. All of this said, one of the best holders we’ve tested is the iOttie Easy One Touch 4 CD Slot Mount. The name is a mouthful, but it’ll fit in any car with a CD player and kept an iPhone 12 Pro firmly in place. Not only does it work with pretty much every phone out there, it also comes with built-in cable management to help keep your dash board tidy.
Using a cup holder isn’t the most obvious place to keep your phone mount, but it works surprisingly well. Thanks to its long neck and sturdy construction, this holder will position your phone high enough so it’s easy to see while keeping it out of your field of vision.
You’ll lose a place for your skinny latte of course, but that’s the price you pay for not being too hot or cold or worrying that your phone will fall at any moment.
2. iOttie Easy One Touch 4 CD Slot Mount Putting your neglected CD player to good use Specifications Price: $20 Wireless Charging: No Color: Black Orientation: 360-degree Type: CD Slot TODAY’S BEST DEALS View at Amazon View at Verishop View at Walmart 11 Amazon customer reviews ☆ ☆ ☆ ☆ ☆ Reasons to buy + The mount can be rotated into portrait and landscape + Using a CD player slot means you don’t lose an air vent or have to make sure it’s mounted firmly on your dashboard + The mount is strong and doesn’t move when you tap or rotate your phone Reasons to avoid – Not all cars have CD players – People who need to use the included Bracket might have a battle on their hands – No charging capabilities Once set up, your phone isn’t going anywhere and the chances are good that your CD slot will be high enough that your screen is never more than a quick glance away. Specifications Price: $25 Wireless Charging: No Color: Silver Orientation: 360-degree Type: Vent TODAY’S BEST DEALS View at Walmart View at Moment View at Crutchfield Reasons to buy + The mount can be rotated into portrait and landscape mode + Construction is solid and will stand up to daily use + Cable management is a feature other mounts don’t have + Nice soft grips mean your phone won’t be damaged Reasons to avoid – There are cheaper options – The mount doesn’t charge your device – Some larger phones might not fit if they’re wearing a case
Belkin included an area for you to keep your charging cable so it doesn’t fly around your car when you aren’t using it, and it’s surprisingly effective. Similar to the iOttie CD Slot Mount, the Belkin accessory is small and slim enough that it doesn’t stand out even when it isn’t being used.
4. iOttie Easy One Touch 5 Smartphone Car Mount Proving suction cups don’t have to be terrible Specifications Price: $30 Wireless Charging: No Color: Black Orentiation: Portrait and Landscape Design: Suction Cup TODAY’S BEST DEALS View at Best Buy View at BHPhoto View at Verishop Reasons to buy + You don’t lose any air vents + Once attached it will definitely stay that way + Putting your phone into the holder is a cinch + The telescopic arm gives you more flexibility than other mounts Reasons to avoid – Getting the mount off the dash can be a real battle – Pretty big and can get in the way when not in use – As good as that suction cup is, you still need a surface to attach it to
We’ll preface this by saying that a lot of people don’t normally rate phone holders with suction cups.
Like some of the best mounts, this one holds your phone rock steady when you’re driving around, and putting the device into the holder is a simple one-handed affair. Sandmarc Active Car Mount For the people who want magnetic charging Specifications Price: $60 Wireless Charging: Up to 7.5W Color: Silver Orientation: Vertical Type: Vent TODAY’S BEST DEALS Check Amazon View at Sandmarc Reasons to buy + Strong magnets to hold your phone steady + Charges your phone while you drive + Looks the part, unlike some cheaper options + Come with a charging cable in the box Reasons to avoid – Arguably on the pricey side – Works best with iPhone 12 and MagSafe, needs a magnet to use it – Clip mechanism means you need something to attach it to
YOSH Car Phone Mount Holder Magnetic Air Vent The cheap and cheerful option Specifications Price: $11 Wireless Charging: No Color: Black Orientation: 360-degree Type: Vent TODAY’S BEST DEALS View at Amazon View at Amazon 37 Amazon customer reviews ☆ ☆ ☆ ☆ ☆ Reasons to buy + The magnets are strong and your phone won’t budge from the holder + Almost invisible when you aren’t using it + Comes with multiple magnets in the box so you can use two phones with it Reasons to avoid – You’ll lose an air vent – The mount won’t charge your phone and magnets don’t support MagSafe The only potential issue with this holder is the fact you need to affix a disc to the back of your phone — something for the magnets to attach to, basically. The PopSockets PopMount 2 Car Dash holder has a strong suction cup that should do the trick on most dashboards. You’ll also need to take your phone’s unique qualities into account, like if it has MagSafe or you need something that can accommodate a PopSocket or similar stand. Testing begins with making sure the holder itself is able to find a solid grip on whatever part of the car it’s supposed to attach to — windscreen, air vent, etc — and that it will hold a phone in place while driving. From there, it’s a case of seeing how easily a phone can be inserted and removed, how well any movable parts work, and whether any additional features do their jobs well.
Be First to Comment