Out of the box your Plantronics C054 (CS540) wireless headset system comes paired to the charging base. In the case your headset comes unpaired or you hear a triple beep tone, then follow this quick guide. Press and hold the pairing button for 5-8 seconds on the back of your C054 charging base, then release your finger. Hold the volume control up button on your earpiece (in or out of the charging base is OK) until a solid white LED light appears on the headset, then release.
2 Step Plantronics C054 Pairing Guide
Press and hold this button for about 5 seconds until the white LED light flashes in the front, then release your finger. On your C054 microphone, press straight up and hold on the volume control, until a white LED light appears on the earpiece, then release your finger
Plantronics CS540 Setup, Installation, and Users Guide
The following guide will show step-by-step how to setup, install, and start using your new Plantronics CS540 wireless headset. Once setup is complete and you have tested the unit, allow 3 hours to fully charge the battery before your first full day of usage. It will have plastic modular plugs on each end and a black connector in the middle of the cable. Take the larger modular plug and insert it into the base that shows a picture of a telephone.
Option D) Install CS540 with an Electronic Hook-Switch Cable (EHS) for remote answer and hang-up. When finished, place the handset back in the cradle to hang-up the call and push the button on the side of the CS540 to turn the headset off. Alternatively, you can leave the headset on at all times and simply remove your handset to take a call and replace when finished. You simply need to change the compatibility slide switch to work with your phone.
B-1) Plug the Telephone Interface Cable into the headset port (usually located on the bottom of the phone).
Alternatively, you can leave the headset on at all times and simply press the appropriate buttons on your telephone to take a call and replace when finished.
You simply need to change the compatibility slide switch to work with your phone. (NOTE: It’s best to do a test run to determine placement of the HL10 before you remove the backing of the strips.)
You simply need to change the compatibility slide switch to work with your phone. D-1) Unplug your Telephone Interface Cable from the base (From Step 2) and store for future use – Do Not Throw It Away! In case you change phones in the future, you may need this cable, depending on compatibility.
D-3) Plug the other end of the Electronic Hookswitch Cable (EHS) into your telephone’s Headset Interface Port.
NOTE: You may also need to activate the EHS port on your phone for ‘Plantronics’ headset use. Polycom for example: Menu > Settings > Basic > Preferences > Headset > Hook Switch Mode and change from Regular to Plantronics
This is also the button to press if you’re using the HL10 Handset Lifter or EHS Cable to answer/hang-up calls remotely while away from your desk. The second button (or rocker switch) is located at the back of the headset and controls your speaker volume.
Finding an adjustment on the base which allows your headset to be in a middle position will typically work best. You will hear three high tone beeps indicating the microphone is muted and the LED light on the base will turn solid red. Pushing the button in again will deactivate the mute feature allowing your caller to hear you again. Your CS540 base has two volume adjustment dials (Speaker 1-4 & Microphone 1-6) and one compatibility slide switch (Labeled A-G).
As you know each call you take is different so having a volume control on the headset lets you easily adjust as needed. NOTE: If you hear an echo or feedback with your headset, it may be caused by your Microphone Volume being set slightly louder than it needs to be. The Compatibility Slide Switch (settings A-G) is the true “Brains” of the Plantronics CS540.
How to Pair Multiple Headsets to the Plantronics CS500 Wireless Headset
After you have your caller on the line, place the first guest headset into the primary user’s charge cradle. Press the guest headset volume up button until the indicator light turns on. When the base subscription LED stops flashing white and remains solid white, the request to join will be heard in the primary user’s headset The primary user will have to press their call button within 10 seconds to accept the guest.
Plantronics Bluetooth Headset Pairing Instructions
Press and hold down the silver call control button in for 6-10 seconds. Follow the pairing instructions for your cell phone or other Bluetooth device. Press and hold the call control button for 5 or 6 seconds until the light starts flashing an alternating red-blue. Follow the pairing instructions for your cell phone or other Bluetooth device.
Press and hold the power button for 5 or 6 seconds until the light starts flashing an alternating red-blue. Follow the pairing instructions for your cell phone or other Bluetooth device.
Press and hold down the silver call control button in for 6-10 seconds. For the Plantronics Pulsar 590 & 590A & the Universal Adapter: Begin with the headset turned off.
Power the headset on and when the indicator light flashes red and blue, release the call control button. When adapter starts flashing red and blue release the buttons. When the indicator light flashes red and blue, release buttons. While pendant is flashing red and blue, use the phone menu to search for Bluetooth devices and select “260 Plantronics.” When prompted for passkey, enter 0000.
Press and hold down the call control button while also rotating the multi function dial upward (away from the light) until the indicator light on the headset starts flashing red then green. Hit and hold the volume/mute switch in until the indication light starts blinking. On the headset push in and hold the mute/volume dial until the indicator light begins to flash. On the adapter press and hold the blue power button for 10 seconds.
Plantronics C054 Headset User Guide
Education Aug 08, 2019 · 1-800-683-5715 | https://headsetadvisor.com/Follow this quick setup guide with your Plantronics CS540 or C054 wireless headset when you connect to a desk pho…
Be First to Comment