On your cell phone, go to the Bluetooth menu and search for (or add) a device. Press and hold the call control button for about 5-6 seconds until the light on the headset starts flashing an alternating red-blue.
On your cell phone, go to the Bluetooth menu and search for (or add) a device. The ML10 features QuickPair technology, which means that the first time you turn the headset on, it automatically goes into pairing (discoverable) mode.
How to Connect Wireless Headsets to a Landline Phone
VoIP systems allow you to purchase equipment outright and have your IT team manage the service. VoIP only relies on your internet connection, allowing support of an unlimited number of lines. That being said, if you’re using a landline telephone, follow this helpful guide on connecting a wireless headset to your office phone. *Keep in mind every wireless phone headset manufacturer, depending on the model may connect slightly different, but very similar.
If yours does and you want to be able to press a button on your phone to answer/end calls, add the extension cord to go with your wireless landline headset. Plug in your AC power adapter to the wall, then connect the other end into your wireless phone headset charging base. Most customers add a Handset Lifter to go with their wireless headset, so you’re able to answer/end calls when away from the phone. Better user experience- you press one button to answer/end calls, rather than physically removing your handset and hanging it up
Adding a Handset Lifter to go with your wireless landline headset is highly recommended.
Reference the quick video below, so you can see how a Handset Lifter is installed on your office phone with a wireless headset. Most wireless headsets for landline phones operate on DECT 6.0 technology, rather than Bluetooth. Although this is a wireless frequency as well, DECT headsets operate on their own channel to avoid interference from common devices like Bluetooth or Wifi.
Choosing a compatible office phone to go with a wireless landline headset is important for an easy setup, and great user experience. Bluetooth wireless headsets are indispensable today, allowing you to answer calls and talk in a hands-free manner. Then you can connect this to a headset of your choice … and you’re ready to answer and make calls with the help of Bluetooth technology. Walk freely around your home or office as you connect with important clients, customers, business partners, or colleagues via your desk phone!
We recommend getting a headset with multipoint pairing so you can connect it to both your mobile and landline phone and seamlessly switch between the two. Whether you want to connect a cordless phone to a landline or use a Bluetooth headset with it, it’s all possible thanks to the rapid advances in communication technology over the years.
Connecting the Plantronics CS510/CS520 Headset to a Desk Phone
With superior comfort, easy call management, and outstanding audio quality, the CS500 Series is a reliable headset for many offices and desk-centric workers.
Plantronics Bluetooth Headset Pairing Instructions
Press and hold down the silver call control button in for 6-10 seconds. Follow the pairing instructions for your cell phone or other Bluetooth device. Press and hold the call control button for 5 or 6 seconds until the light starts flashing an alternating red-blue. Follow the pairing instructions for your cell phone or other Bluetooth device. Press and hold the power button for 5 or 6 seconds until the light starts flashing an alternating red-blue. Follow the pairing instructions for your cell phone or other Bluetooth device.
Press and hold down the silver call control button in for 6-10 seconds. For the Plantronics Pulsar 590 & 590A & the Universal Adapter: Begin with the headset turned off. Power the headset on and when the indicator light flashes red and blue, release the call control button.
When adapter starts flashing red and blue release the buttons. When the indicator light flashes red and blue, release buttons. While pendant is flashing red and blue, use the phone menu to search for Bluetooth devices and select “260 Plantronics.” When prompted for passkey, enter 0000.
Press and hold down the call control button while also rotating the multi function dial upward (away from the light) until the indicator light on the headset starts flashing red then green. Hit and hold the volume/mute switch in until the indication light starts blinking. On the headset push in and hold the mute/volume dial until the indicator light begins to flash. On the adapter press and hold the blue power button for 10 seconds.
Pairing Instructions for All Plantronics Bluetooth Models
Those headsets are listed at the bottom of this article and are linked to their specific pairing instructions.
How To Use Plantronics Wireless Headset
Depending on which telephone you have, or accessory you ordered will determine how you use your Plantronics wireless headset. To answer or make an outbound call, pick up your telephone handset and set it on your desk.
Using your wireless headset with remote call answering accessory (Recommended and preferred)
Quick volume control reference guide below for your specific Plantronics wireless headset
The best positioning for plantronics phone headset microphone is 1-2 fingers width away from your mouth to give the best sound quality possible. DECT 6.0: Wireless technology that keeps your calls secure and private, without interference from common devices like Wifi and Bluetooth.
DECT 6.0 headsets will give you about 10x more wireless range compared to Bluetooth but won’t connect with your mobile phones. You maybe be using phone system providers like Ringcentral, Vonage, Jive, 8×8, Nextiva, Avaya, Cisco, and many others.
Keep in mind before purchasing any Plantronics wireless USB headset for your computer, each model comes in two variations.and older Macs orcomputers. There’s a lot of confusion for end customers when it comes to using a Plantronics wireless headset on their phone system through the computer.
If you already have a phone system that doesn’t have this integration, the best thing you can do is reach out to your provider and request that to be added in the future. button to press Making an outbound call: Pull up your computer softphone client.
Where it becomes a bit confusing, is knowing how to use your headset and which accessory is required based on the device or phone system you have.
2 Step Plantronics WO2 Pairing Guide For Mobile Phone
Press straight down and hold the Bluetooth pairing button on your Plantronics WO2 charging base until the red and blue LED light start flashing.Go into your mobile phone settings, click Bluetooth and wait for your device to be recognized.
How to Pair the Plantronics Voyager Legend Bluetooth Headset
If for a second time your Voyager Legend LED doesn’t flash red/blue, your headset may have already been paired. While the Voyager Legends LEDs are flashing red/blue, activate Bluetooth on your phone and set it to search for new devices.
If your phone asks, enter four zeros (0000) for the passcode or simply accept the connection. NOTE: To enable caller name announcement, allow access to your contacts if your phone prompts you.
While the Voyager Legends LEDs are flashing red/blue, activate Bluetooth on your phone and set it to search for new devices. If your phone asks, enter four zeros (0000) for the passcode or simply accept the connection. NOTE To enable caller name announcement, allow access to your contacts if your phone prompts you. Customers often ask us how to connect Plantronics Bluetooth headsets and with this guide, you will be up and going in a matter of minutes.
How to Pair Your Plantronics Voyager 510 Bluetooth Headset
and the volume up simultaneously until the headset begins to flash red and blue. Your 510 headset will now have a continuous blue light blinking.
Be First to Comment