The following procedure details how to pair and use your Voyager Focus UC headset with the BT600 mini USB adapter. Some softphones require the installation of Plantronics Hub for Windows and Mac (plantronics.com/software) to enable headset control (answer/end and mute) functionality. NOTE Plantronics Hub software also allows you to customize your headset’s behavior through advanced settings and options
To configure your Bluetooth USB adapter to play music, go to Start menu > Control Panel > Sound > Playback tab.
How do I Pair and use the Plantronics Voyager Focus?
1) To put your headset in pair mode, press and hold the power button towards the Bluetooth icon until you hear “pairing” and the headset LEDs flash red and blue. If not, put the headset in pairing mode by pressing and holding the power button towards the Bluetooth icon until you hear “pairing” and the headset LEDs flash red and blue. NOTE: Your headset can pair with up to 8 devices but only maintain 2 connections simultaneously; this includes the Bluetooth USB adapter. Play, pause and skip are on the same side in the center of the ear pad.
Your battery and headset usage indicator light is just below the power/call answer button.
Connect And Pair; Connect To Pc; Configure Usb Adapter; Pair To Mobile Device – Plantronics Voyager Focus UC User Manual [Page 5]
Insert the Bluetooth USB adapter into your laptop or PC. Windows and Mac (plantronics.com/software) to enable headset control (answer/end and mute)
Plantronics Hub software also allows you to customize your headset’s behavior through
Your high-fidelity Bluetooth USB adapter comes ready to take calls. To configure your Bluetooth USB adapter to play music, go to Start menu > Control Panel > Sound To pause music when you place or receive calls, go to Start menu > Control Panel > Sound >
To configure the Bluetooth USB adapter, go to Apple menu > System Preferences > Sound. To put your headset in pair mode, press and hold the power button towards the Bluetooth icon until you hear “pairing” and the headset LEDs flash red and blue. Activate Bluetooth on your phone and set it to search for new devices.
Pair Usb Adapter Again – Plantronics Voyager Focus UC User Manual [Page 6]
Put your headset in pair mode by pressing and holding the power button towards the Bluetooth icon until you hear “pairing” and the headset LEDs flash red and blue. a pen or paperclip until the Bluetooth USB adapter flashes red and blue.
poly B825 Voyager Focus UC Headphone User Guide
poly B825 Voyager Focus UC Headphone User Guide Idle = OpenMic (hear your surroundings) Headset LEDs for pairing, battery status, online indicator Call button ([ ])/Press to interact with Microsoft Teams (app required) Power button Bluetooth pair butt on NOTE Both the charge stand and micro USB cable can be plugged into either computer or wall charger. Standard LEDs USB LEDs What they mean Flashing red and blue Pairing Solid blue Headset connected Flashing blue On a call Solid red Mute active Flashing purple Streaming media from computer LEDs when Microsoft Teams* is detected Flashing red and blue Pairing Solid purple Headset connected Flashing blue On a call Solid red Mute active Pulsing purple Microsoft Teams notification
Turn on your headset and insert the Bluetooth USB adapter into your laptop or PC. Your high-fidelity Bluetooth USB adapter comes ready to take calls.
To configure your Bluetooth USB adapter to play music, go to Start menu > Control Panel > Sound > Playback tab. Select Plantronics BT600, set it as the Default Device and click OK. To pause music when you place or receive calls, go to Start menu > Control Panel > Sound > Communications tab and select the desired parameter.
To configure the Bluetooth USB adapter, go to Apple menu > System Preferences > Sound. To put your headset in pair mode, press and hold the power button towards the Bluetooth icon until you hear “pairing” and the headset LEDs flash red and blue. NOTE Your headset can pair with up to 8 devices but only maintain 2 connections simultaneously; this includes the Bluetooth USB adapter. Put your Bluetooth USB adapter into pair mode by gently pressing and holding the pair button with a pen or paperclip until the Bluetooth USB adapter flashes red and blue.
IMPORTANT Before using, charge the headset fully to reset the accuracy of the talk time prompts. NOTE Both the charge stand and micro USB cable can be plugged into either a computer or wall charger. Wearing the headset, tap the Call button and listen to the voice alert (smartphone only). Some softphones require the installation of Plantronics Hub for Windows and Mac to enable headset control (answer/end and mute) functionality. Install Plantronics Hub for Windows and Mac onto your computer by visiting poly.com/software. Plantronics Hub iOS and Android Windows and Mac Call control for softphones X Change headset language X Update firmware X Turn features on/off X X View user guide X Battery meter X X
Idle = OpenMic (hear your surroundings) Headset LEDs for pairing, battery status, online indicator Call button ([ ])/Press to interact with Microsoft Teams (app required) Power button Bluetooth pair butt on If your smartphone has a voice-enabled assistant, press and hold the Call button for 2 seconds and wait for the phone prompt and then tell the phone to dial the number of a stored contact. You can add a voice prompt notification by managing your mute features with Plantronics Hub for Windows and Mac. While not on a call, tap the red Mute button to activate OpenMic and hear your surroundings. Control the level of ambient noise you hear by adjusting the volume wheel. Press and hold both the Mute and Play/pause buttons for more than 4 seconds until the LEDs flash purple twice, being careful to not touch the earcup padding or allow it to come in contact with surfaces.
Hold both the Mute and Call buttons for more than 4 seconds until the LED flashes purple then red. For Microsoft Teams, tap the headset’s Call button to interact (application required). For Skype for Business, press and hold the headset’s Call button for 2 seconds to interact (application required).
Once back in range with your phone or USB adapter, press the Call control button to exit DeepSleep mode.
Dock your headset in the charge stand and plug it directly into your computer. Disconnect your headset from other devices; this includes unplugging your USB adapter from the computer. Firmware updates are designed to keep your headset current with the latest technology. Disconnect your headset from other devices; this includes unplugging your USB adapter from the computer.
Check the following: Make sure the softphone you are using is supported by viewing our software compatibility guide. If required to enable headset control (answer/end and mute) functionality, ensure you have Plantronics Hub for Windows/Mac (v. 3.6 or later) installed. Ensure that you have Plantronics Hub for Windows/Mac v. 3.6 or later installed How do I interact with Microsoft Teams or Skype for Business? For Skype for Business, press and hold the Call button for 2 seconds to interact.
Yes, while your headset is optimized for Microsoft Teams, it can be configured to use with other supported softphones. For Windows, go to Start menu > Control Panel > Sound > Recording tab. For Windows, go to Start menu > Control Panel > Sound > Playback tab.
To increase Bluetooth density, change the setting from stereo telephony to mono telephony by holding the Mute button for four seconds while not on a call, until you hear “Wideband stereo off.” You can also change the setting in Plantronics Hub for Windows/Mac by going to Settings > Wireless > Extended Range Mode.
Charge the headset fully to reset the accuracy of the talk time prompts. Check and see if OpenMic is on by pressing the red mute button on the boom when you are not on a call.
Our exclusive OpenMic feature lets you control the level of ambient noise you hear. 345 Encinal Street Santa Cruz, CA 95060 United States
poly Voyager Focus 2 UC Series Bluetooth Headset User Guide
NOTE The charge stand plugs into a computer or wall charger’s USB port. Your high-fidelity Bluetooth USB adapter comes pre-paired to your Poly device. Standard LEDs USB LEDs What they mean Flashing red and blue Pairing Solid blue Headset connected Flashing blue On a call Solid red Mute active Flashing purple Streaming media from computer LEDs when Microsoft Teams* is detected USB LEDs What they mean Flashing red and blue Pairing Solid purple Microsoft Teams connected Flashing blue On a call Solid red Mute active Pulsing purple Microsoft Teams notification
Your Bluetooth USB adapter comes pre-paired to your headset.
Turn on your headset and insert the Bluetooth USB adapter into your laptop or PC. When on a call, the LED on the USB adapter flashes blue. Load Poly Lens Desktop App by visiting poly.com/lens. To put your headset in pair mode, slide and hold the Power switch away from the off position until you hear “pairing” and the headset LEDs flash red and blue.
Activate Bluetooth on your phone and set it to search for new devices. NOTE Your headset can pair with up to 8 devices but only maintain 2 connections simultaneously; this includes the Bluetooth USB adapter.
Pair mode Slide and hold the headset Power switch away from the off position until the LEDs flash red and blue. Bend the boom so it is approximately 2 finger widths from the corner of your mouth.
Bend the boom so it is approximately 2 finger widths from the corner of your mouth. Gently flex the headband wider if the fit is uncomfortable on your ears. It takes approximately 2 hours to fully charge your headset. • With the headset inactive, slide and release the Power switch away from the off position. Listen to the voice alert or observe the headset LEDs. Customize your device behavior through advanced settings and options with Poly Lens App.
Some softphones require the installation of Poly software to enable device call control (answer/end and mute) functionality. NOTE Device settings are also available in Plantronics Hub App.
Keep your firmware up-to-date to improve performance and add new features to your Poly device. Update your firmware using your computer with Poly Lens App.
It’s easy to answer calls from two devices (including a softphone). Mute button Rotate your microphone boom and click it into the up position
Take off your headset (requires active smart sensors). Smart sensors respond when you put on or take off your headset.
Power on your headset while pressing the Mute button for more than 4 seconds until the LEDs flash purple 4 times, being careful to not touch the earcup padding or allow it to come in contact with surfaces
Hold both the Mute and Call buttons for more than 4 seconds until the LED flashes purple then red.
Repeat to reactivate; the LED flashes purple then blue. Siri, Google Assistant™, Cortana Press and hold the Call button for 2 seconds to activate your phone’s default voice assistant.
You can wirelessly charge your headset language using Poly Lens App. If your audio is cutting out during softphone calls, you may be experiencing Bluetooth density problems.
Improve audio performance by using density-friendly corded mode. Disconnect your Bluetooth USB adapter from your computer Connect your headset directly to your computer with the provided 1.5 m USB cable Power off your headset to use density-friendly corded mode NOTE Your headset battery charges while in corded mode. The headset audio is not working as expected when connected to my computer.
If required to enable headset control (answer/end and mute) functionality, ensure you have Poly Lens Desktop Select your softphone application in Poly Lens Desktop App. Tap the headset Call button to quickly open and use Microsoft Teams. Set your target phone by going to Poly Lens Desktop App (Teams model only) Does my Microsoft Teams-enabled headset work with other softphones? Yes, while your headset is optimized for Microsoft Teams, it can be configured to use with other supported softphones. Deplete your headset battery and then fully charge to reset the accuracy of the talk time prompts. Poly, the propeller design, and the Poly logo are trademarks of Plantronics, Inc. Bluetooth is a registered trademark of Bluetooth SIG, Inc. and any use by Plantronics, Inc. is under license.
How to Pair the Plantronics Voyager Legend Bluetooth Headset
If for a second time your Voyager Legend LED doesn’t flash red/blue, your headset may have already been paired. While the Voyager Legends LEDs are flashing red/blue, activate Bluetooth on your phone and set it to search for new devices.
If your phone asks, enter four zeros (0000) for the passcode or simply accept the connection.
NOTE: To enable caller name announcement, allow access to your contacts if your phone prompts you.
While the Voyager Legends LEDs are flashing red/blue, activate Bluetooth on your phone and set it to search for new devices. If your phone asks, enter four zeros (0000) for the passcode or simply accept the connection.
NOTE To enable caller name announcement, allow access to your contacts if your phone prompts you. Customers often ask us how to connect Plantronics Bluetooth headsets and with this guide, you will be up and going in a matter of minutes.
Manual Plantronics Voyager Focus UC (page 1 of 16) (English)
In addition, it may be that your ISP may have a maximum size for emails to receive.
Be First to Comment